Update README.md

Reviewed-on: #1

.zshrc

@@ -1,38 +0,0 @@
-# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
-# Initialization code that may require console input (password prompts, [y/n]
-# confirmations, etc.) must go above this block; everything else may go below.
-if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
-  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
-fi
-
-HISTFILE=~/.histfile
-HISTSIZE=2000
-SAVEHIST=2000
-bindkey -v
-
-# End of lines configured by zsh-newuser-install
-# The following lines were added by compinstall
-bindkey "\e[3~" delete-char
-autoload -Uz compinit && compinit
-zstyle ':completion:*' menu select
-# End of lines added by compinstall
-
-
-source /home/nnduc/git/powerlevel10k/powerlevel10k.zsh-theme
-source /home/nnduc/git/zsh-autosuggestions/zsh-autosuggestions.zsh
-
-zshaddhistory() {
-    whence ${${(z)1}[1]} >/dev/null || return 2
-}
-
-# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
-[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
-
-export EDITOR=nvim
-export TERM='xterm-256color'
-export PATH="$HOME/.local/bin:$PATH"
-
-alias ls='ls --color=auto'
-alias doc='docker-compose'
-alias cla='cd /home/nnduc/.cache/ && claude'
-alias wa="watch -n1 "sensors | grep -E 'Tctl|edge|junction|mem:|Composite'""

MangoHud/MangoHud.conf

@@ -1,22 +0,0 @@
-# Shift_R+F12 shows/hides the HUD
-no_display
-toggle_hud=Shift_R+F12
-fps
-frametime
-frame_timing
-gpu_stats
-cpu_stats
-# diagnostics: log starts 20s after launch, Shift_L+F2 toggles logging
-output_folder=/home/nnduc/mangologs
-autostart_log=20
-log_interval=0
-toggle_logging=Shift_L+F2
-gpu_core_clock
-gpu_mem_clock
-vram
-ram
-cpu_mhz
-# fps
-fps_limit=80,60,120,0
-fps_limit_method=early
-toggle_fps_limit=Shift_L+F1

README.md

@@ -33,264 +33,9 @@ Section "Device"
     Driver "intel"
     Option "TearFree"    "true"
 EndSection
-```
-    - amd: xf86-video-amdgpu (`VariableRefresh` = FreeSync, fullscreen apps only under Xorg)
-    - sudo -e /etc/X11/xorg.conf.d/20-amdgpu.conf
-```
-Section "Device"
-    Identifier "AMD"
-    Driver "amdgpu"
-    Option "VariableRefresh" "true"
-    Option "TearFree" "true"
-EndSection
-```
-## High refresh rate flicker (AMD):
-- At high refresh rates (240Hz+) the vblank can be too short for the GPU to
-  switch VRAM clock unnoticed, so the desktop flickers under changing load.
-  Windows avoids it by keeping VRAM clock high; amdgpu on Linux may not.
-- Check: if the `*` jumps between levels while idle, this is likely the cause.
-```bash
-watch -n0.2 cat /sys/class/drm/card*/device/pp_dpm_mclk
-```
-- Fix 1: run the desktop at a lower rate (`i3/config` uses 120Hz). Find the
-  output name with `xrandr` (e.g. `DisplayPort-0`) and adjust it there:
-```bash
-xrandr --output DisplayPort-0 --mode 1920x1080 --rate 120
-```
-- sway: same idea in `sway/config` (`swaymsg -t get_outputs` for the name).
-  Keep `adaptive_sync off` there — sway applies it to the whole desktop, which
-  can stutter/flicker:
-```
-output DP-1 mode 1920x1080@120Hz adaptive_sync off
-```
-- Fix 2: keep the high rate and pin VRAM clock to its top level (more idle
-  power, resets on reboot; top level is the last line of `pp_dpm_mclk`):
-```bash
-echo manual | sudo tee /sys/class/drm/card*/device/power_dpm_force_performance_level
-echo 3 | sudo tee /sys/class/drm/card*/device/pp_dpm_mclk
-```
-- Gaming: 120Hz + FreeSync is plenty for ~60fps games (VRR covers the dips).
-  Cap fps a few below max refresh so VRR stays active, e.g. Dota 2 console
-  `fps_max 117`. Under Xorg, VRR applies to fullscreen games only; under sway
-  with `adaptive_sync off` games run without it.
-- To turn off FreeSync for a single game (Xorg): `adaptive_sync=false %command%`
-  (Steam launch options).
-- Login greeters (SDDM, LightDM, ...) are fullscreen and mostly static, so VRR
-  drops to the bottom of the range and flickers. `mesa/drirc` disables it for
-  any `*greeter*` executable; install system-wide (greeters don't read `~/.drirc`):
-```bash
-sudo cp xorg/20-amdgpu.conf /etc/X11/xorg.conf.d/
-sudo cp mesa/drirc /etc/drirc
 ```
 ![stones](./screenshots/Screenshot_20240503_095414.png)
 
-## Shader cache (Steam)
-
-With Steam's *Shader Pre-caching* off (it re-downloads caches for every game
-almost daily), Steam points Mesa at a temporary
-`~/.local/share/Steam/shader_cache_temp_dir_*` and deletes it when the game
-exits, so every session recompiles shaders (hitches everywhere, every time).
-Steam only sets the legacy `MESA_GLSL_CACHE_DIR`, so the newer variable wins.
-Set it session-wide (i3 is started by SDDM, `environment.d` doesn't reach
-Steam). The cache lives in `/var/cache` so `~/.cache` cleaners don't wipe it,
-with one private subdir per user: Mesa creates its dirs `0700`, so a single
-shared dir can't work (and would let users poison each other's shaders).
-`/etc/environment` can't expand `$USER`, so use `/etc/profile.d` (SDDM's
-X11/Wayland sessions and TTY logins source it). Run as your normal user, not
-from a root shell (`~` and `$USER` must be yours), with Steam closed:
-```bash
-sudo mkdir -p /var/cache/mesa_shader_cache
-sudo chmod 1777 /var/cache/mesa_shader_cache   # like /tmp: anyone creates own subdir
-mv ~/.cache/mesa_shader_cache /var/cache/mesa_shader_cache/$USER  # no sudo: keeps ownership
-sudo sed -i '/^MESA_SHADER_CACHE_/d' /etc/environment
-sudo tee /etc/profile.d/mesa-shader-cache.sh >/dev/null <<'EOF'
-export MESA_SHADER_CACHE_DIR="/var/cache/mesa_shader_cache/$USER"
-export MESA_SHADER_CACHE_MAX_SIZE=10G
-export PRESSURE_VESSEL_FILESYSTEMS_RW=/var/cache/mesa_shader_cache
-EOF
-```
-The last line matters: Steam runs games (native and Proton) in the Steam
-Linux Runtime container, which shares `$HOME` but gives the game its own empty
-`/var`. Without it the cache is written to a tmpfs inside the container and
-thrown away when the game exits.
-Re-login, then check it's yours and persists after playing (should print > 0):
-```bash
-echo $MESA_SHADER_CACHE_DIR; ls -ld $MESA_SHADER_CACHE_DIR   # owner must be you
-find $MESA_SHADER_CACHE_DIR -mmin -60 -type f | wc -l
-```
-Deleting the cache is harmless: shaders just recompile (stutter) on first use.
-
-## Installing dependencies
-
-Package availability differs between distros — Arch has everything below in the
-official/multilib repos, no AUR needed. Gentoo's main tree is missing a few
-newer tools (noted below); those need the [GURU overlay](https://wiki.gentoo.org/wiki/Project:GURU)
-or manual/cargo install.
-
-### Window manager & session (both i3 and sway)
-
-**Arch**
-```bash
-sudo pacman -S i3-wm i3status i3blocks sway swaybg swaylock swayidle \
-  waybar polybar rofi alacritty dex snixembed \
-  xss-lock xorg-xset xorg-xrandr xclip scrot imagemagick i3lock \
-  network-manager-applet blueman gnome-keyring polkit-gnome \
-  pipewire wireplumber pipewire-pulse pipewire-alsa pipewire-jack \
-  pasystray playerctl brightnessctl \
-  fcitx5 fcitx5-im fcitx5-configtool
-```
-
-**Gentoo**
-```bash
-sudo emerge --ask \
-  x11-wm/i3 x11-misc/i3status x11-misc/i3blocks \
-  gui-wm/sway gui-apps/swaybg gui-apps/swaylock gui-apps/swayidle \
-  gui-apps/waybar x11-misc/polybar x11-misc/rofi x11-terms/alacritty \
-  x11-misc/dex x11-misc/snixembed \
-  x11-misc/xss-lock x11-apps/xset x11-apps/xrandr x11-misc/xclip media-gfx/scrot \
-  media-gfx/imagemagick x11-misc/i3lock \
-  net-misc/networkmanager net-misc/network-manager-applet net-wireless/blueman \
-  app-crypt/gnome-keyring gnome-extra/polkit-gnome \
-  media-video/pipewire media-video/wireplumber media-sound/playerctl \
-  app-i18n/fcitx app-i18n/fcitx-qt app-i18n/fcitx-gtk
-```
-- `brightnessctl` is **not in the main Gentoo tree** — install from the GURU
-  overlay (`sudo emerge --ask brightnessctl`, after enabling GURU below) or
-  build from source. Add your user to the `video` and `input` groups either way.
-- PipeWire's PulseAudio/ALSA/JACK compatibility on Gentoo is controlled by
-  USE flags (`pulseaudio`/`alsa`/`jack`... check `equery u media-video/pipewire`)
-  rather than separate packages.
-- `pasystray` (systray volume icon) is not in the main tree either; the GURU
-  overlay or `pavucontrol` are common substitutes.
-
-Enable the GURU overlay once, needed by several packages below:
-```bash
-sudo eselect repository enable guru
-sudo emerge --sync guru
-```
-
-### Wayland screenshots, clipboard, and screen sharing (sway)
-
-These are the pieces the Print-key bindings and screen sharing/recording in
-`sway/config` depend on — without `xdg-desktop-portal-wlr` specifically,
-no app (browser tab share, Discord, OBS) can capture the screen at all.
-
-**Arch**
-```bash
-sudo pacman -S grim slurp wl-clipboard cliphist \
-  xdg-desktop-portal xdg-desktop-portal-wlr xdg-desktop-portal-gtk \
-  wf-recorder obs-studio
-```
-
-**Gentoo**
-```bash
-sudo emerge --ask \
-  gui-apps/grim gui-apps/slurp gui-apps/wl-clipboard \
-  sys-apps/xdg-desktop-portal gui-libs/xdg-desktop-portal-wlr sys-apps/xdg-desktop-portal-gtk \
-  media-video/wf-recorder media-video/obs-studio
-```
-- `cliphist` (clipboard history) is not in the main tree — GURU overlay.
-
-After installing the portal packages, restart the portal service so it picks
-up the new backend:
-```bash
-systemctl --user restart xdg-desktop-portal
-```
-
-### AMD GPU stack (mesa/RADV/amdgpu)
-
-**Arch**
-```bash
-sudo pacman -S mesa lib32-mesa vulkan-radeon lib32-vulkan-radeon \
-  xf86-video-amdgpu linux-firmware-amdgpu libvdpau-va-gl
-```
-Mesa on current Arch already bundles the VA-API driver (`radeonsi_drv_video.so`)
-and there's no separate `mesa-vdpau`/`lib32-mesa-vdpau` package anymore —
-`libvdpau-va-gl` is the VDPAU-to-VA-API translation layer that replaces it.
-
-**Gentoo**
-```bash
-# In /etc/portage/make.conf:
-#   VIDEO_CARDS="amdgpu radeonsi"
-sudo emerge --ask media-libs/mesa media-libs/vulkan-loader \
-  x11-drivers/xf86-video-amdgpu media-video/libvdpau media-libs/libvdpau-va-gl
-```
-Make sure `mesa` is built with `USE="vulkan"` and, for 32-bit/Steam
-compatibility, `ABI_X86="32 64"` in `package.use`.
-
-### Gaming & performance
-
-**Arch**
-```bash
-sudo pacman -S gamemode lib32-gamemode mangohud lib32-mangohud
-```
-
-**Gentoo**
-```bash
-sudo emerge --ask games-util/gamemode
-```
-- `mangohud` is **not in the main Gentoo tree** — GURU overlay
-  (`sudo emerge --ask games-util/mangohud` after enabling GURU).
-
-Adaptive sync (sway): the desktop runs at a fixed 240 Hz with VRR off, because
-sway only renders on change and idle frame rates fall below the panel's 48 Hz
-floor (out of LFC range → flicker). gamemode turns VRR on for DP-1 while a
-game runs and off when it exits (install `gamemode/gamemode.ini` to
-`~/.config/gamemode.ini`); `lock-now` turns it off while locked.
-
-### GPU monitoring & tuning
-
-**Arch**
-```bash
-sudo pacman -S radeontop amdgpu_top nvtop lact lm_sensors
-```
-
-**Gentoo**
-```bash
-sudo emerge --ask app-misc/radeontop sys-process/nvtop sys-power/lm-sensors
-```
-- `amdgpu_top`, `lact`, and `corectrl` (fan curves/overclocking GUIs) are not
-  in the main tree — GURU overlay, or install `lact`/`amdgpu_top` via `cargo`
-  since both are Rust tools.
-
-### Razer peripherals (polling rate, DPI, RGB)
-
-**Arch**
-```bash
-sudo pacman -S openrazer-daemon openrazer-meta polychromatic
-sudo gpasswd -a $USER plugdev
-```
-
-**Gentoo**
-```bash
-sudo emerge --ask sys-apps/openrazer
-sudo gpasswd -a $USER plugdev
-```
-- Gentoo ships a single unified `sys-apps/openrazer` package (driver +
-  daemon together) rather than split `-daemon`/`-meta` packages.
-  `polychromatic` (GUI) is not in the main tree — GURU overlay.
-
-### Notifications & fonts
-
-**Arch**
-```bash
-sudo pacman -S ttf-firacode-nerd
-# tiramisu (notification daemon) is AUR-only on Arch: yay -S tiramisu
-```
-
-**Gentoo**
-```bash
-sudo emerge --ask media-fonts/nerd-fonts
-```
-- `tiramisu` is not in the main Gentoo tree — GURU overlay or build from
-  source (https://github.com/Sweets/tiramisu).
-
-### PipeWire launcher (Gentoo only)
-
-`sway/config` calls `gentoo-pipewire-launcher`, the community launcher script
-documented on the [Gentoo PipeWire wiki page](https://wiki.gentoo.org/wiki/PipeWire) —
-it's a shell script you place on your `PATH` yourself, not a portage package.
-
 ## Vim
 
 ### Vimplug

alacritty/alacritty.toml

@@ -16,20 +16,9 @@ family = "MesloLGS NF"
 [font.normal]
 family = "MesloLGS NF"
 
-[[keyboard.bindings]]
+[keyboard]
-key = "T"
+bindings = [
-mods = "Control|Shift"
+{ key = "T", mods = "Control|Shift", action = "SpawnNewInstance" },
-action = "SpawnNewInstance"
+{ key = "PageUp",  action = "ScrollLineUp" },
-
+{ key = "PageDown", action = "ScrollLineDown" },
-[[keyboard.bindings]]
+]
-key = "PageUp"
-action = "ScrollLineUp"
-
-[[keyboard.bindings]]
-key = "PageDown"
-action = "ScrollLineDown"
-
-[[keyboard.bindings]]
-key = "Return"
-mods = "Shift"
-chars = "\u001b\r"

alacritty/alacritty.toml.dc947f6f.bak

@@ -1,24 +0,0 @@
-[window]
-startup_mode = "Maximized"
-
-[font]
-size = 14.0
-
-[font.bold]
-family = "MesloLGS NF"
-
-[font.bold_italic]
-family = "MesloLGS NF"
-
-[font.italic]
-family = "MesloLGS NF"
-
-[font.normal]
-family = "MesloLGS NF"
-
-[keyboard]
-bindings = [
-{ key = "T", mods = "Control|Shift", action = "SpawnNewInstance" },
-{ key = "PageUp",  action = "ScrollLineUp" },
-{ key = "PageDown", action = "ScrollLineDown" },
-]

i3/config

@@ -10,8 +10,7 @@
 # Please see https://i3wm.org/docs/userguide.html for a complete reference!
 
 set $mod Mod1
-set $wallpaper_dir /media/sync/images/wallpapers
+set $wallpaper '/data/sync/images/wallpapers/suse.png'
-set $terminal 'alacritty'
 # Font for window titles. Will also be used by the bar unless a different font
 # is used in the bar {} block below.
 font pango:NotoSans 12
@@ -20,11 +19,6 @@ font pango:NotoSans 12
 # text rendering and scalability on retina/hidpi displays (thanks to pango).
 #font pango:DejaVu Sans Mono 8
 
-# Clear leftover Wayland env (e.g. from a previous Hyprland/sway session) out of
-# systemd/dbus so dbus-activated apps like Thunar don't try to use a dead compositor.
-# Must run before anything dbus-activated starts.
-exec --no-startup-id sh -c "systemctl --user unset-environment WAYLAND_DISPLAY HYPRLAND_INSTANCE_SIGNATURE SWAYSOCK; dbus-update-activation-environment --systemd DISPLAY XAUTHORITY XDG_CURRENT_DESKTOP=i3 XDG_SESSION_TYPE=x11; pkill -x Thunar"
-
 # Start XDG autostart .desktop files using dex. See also
 # https://wiki.archlinux.org/index.php/XDG_Autostart
 exec --no-startup-id dex --autostart --environment i3
@@ -33,37 +27,26 @@ exec --no-startup-id dex --autostart --environment i3
 # they are included here as an example. Modify as you see fit.
 #exec --no-startup-id /usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh
 # xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
-# screen before suspend. Use systemctl lock-session to lock your screen.
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xrand --output HDMI-0 --mode 1920x1080 --rate 120
+bindsym $mod+l exec i3lock --ignore-empty-password -i $wallpaper
 
-# idle: lock after 5min (xss-lock -> scripts/lock), DPMS off after 15min;
+bindsym $mod+Shift+p exec loginctl poweroff
-# dpms-inhibit skips all of it while a fullscreen window is visible
+bindsym Print exec flameshot gui -c 
-exec --no-startup-id xset b off
-exec --no-startup-id xset s noblank
-exec --no-startup-id xset s 300 300
-exec --no-startup-id xset dpms 0 0 900
-exec --no-startup-id xss-lock -- ~/.config/i3/scripts/lock $wallpaper_dir
-exec --no-startup-id ~/.config/i3/scripts/dpms-inhibit
-
-bindsym $mod+l exec ~/.config/i3/scripts/lock-now $wallpaper_dir
-bindsym $mod+Shift+o exec --no-startup-id ~/.config/i3/scripts/lock-then-suspend $wallpaper_dir
-bindsym $mod+Shift+p exec systemctl poweroff
-
-bindsym Print exec --no-startup-id bash -c 'f="$(xdg-user-dir PICTURES)/$(date +%s_scrot.png)" && scrot -s "$f" && xclip -selection clipboard -t image/png -i "$f" && notify-send "Screenshot saved" "$f"'
-bindsym $mod+Print exec --no-startup-id bash -c 'f="$(xdg-user-dir PICTURES)/$(date +%s_scrot.png)" && scrot "$f" && xclip -selection clipboard -t image/png -i "$f" && notify-send "Screenshot saved" "$f"'
 # NetworkManager is the most popular way to manage wireless networks on Linux,
 # and nm-applet is a desktop environment-independent system tray GUI for it.
 
 # applets
-exec --no-startup-id snixembed --fork
 exec --no-startup-id fcitx5 -d
 exec --no-startup-id nm-applet
 exec --no-startup-id blueman-applet
-exec --no-startup-id /usr/bin/gnome-keyring-daemon --start --components=ssh,pkcs11
+exec --no-startup-id feh --bg-fill $wallpaper
-exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+exec --no-startup-id owncloud 
-exec --no-startup-id ~/.config/i3/scripts/wallpaper-rotate $wallpaper_dir
 exec --no-startup-id pasystray
 exec --no-startup-id polybar
-exec --no-startup-id ~/.config/i3/scripts/guide-freeze
+exec --no-startup-id xset m 1/1 0
+exec xinput --set-prop "Razer Razer DeathAdder V2 X HyperSpeed Mouse" "Device Accel Constant Deceleration" 3
+exec --no-startup-id gentoo-pipewire-launcher restart &
 
 set $refresh_i3status killall -SIGUSR1 i3status
 
@@ -103,20 +86,14 @@ floating_modifier $mod
 # or left-clicking anywhere into the window while holding the floating modifier.
 #tiling_drag modifier titlebar
 #xrandr --output HDMI-2 --auto --right-of eDP1
-# High refresh rates can flicker on AMD (VRAM clock switching), so run the
-# desktop at 120Hz. See README "High refresh rate flicker".
-exec --no-startup-id xrandr --output DisplayPort-0 --mode 1920x1080 --rate 240
 
-# start a terminal
+# start a 3terminal
 #bindsym $mod+Return exec i3-sensible-terminal
-bindsym $mod+Return exec $terminal
+bindsym $mod+Return exec alacritty
 
 # kill focused window
 bindsym $mod+Shift+q kill
 
-# freeze / resume focused window (SIGSTOP / SIGCONT)
-bindsym $mod+m exec --no-startup-id ~/.config/i3/scripts/freeze-toggle
-
 # start dmenu (a program launcher)
 #bindsym $mod+d exec --no-startup-id j4-dmenu-desktop
 #bindsym $mod+d exec --no-startup-id dmenu
@@ -260,20 +237,23 @@ bindsym $mod+r mode "resize"
         bindsym $mod+Tab workspace back_and_forth
 
         # class                 border      bground     text        indicator   child_border
-        client.focused          #3A7CA5     #3A7CA5     #E2EBF0     #0D1B27     #3A7CA5
+        client.focused          #05707E     #05707E     #FFFFFF     #000000     #05707E
-        client.placeholder      #0D1B27     #0D1B27     #BDD5E4     #0D1B27     #0D1B27
+        client.placeholder      #000000     #F1E3D3     #FFFFFF     #000000     #0d100f
-        client.unfocused        #0D1B27     #152535     #6A8DA0     #0D1B27     #152535
+        client.unfocused        #000000     #1B4D3E     #FFFFFF     #000000     #0d100f
-        client.focused_inactive #1A3347     #1A3347     #6A8DA0     #1A3347     #1A3347
+        client.focused_inactive #333333     #C8C9C9     #7A858D     #484E50     #5F676A
 #focused_workspace  #4c7899 #285577 #ffff
 # (No) Title Bars
 
         for_window [class="^.*"] border pixel 1
 
 #floating 
-for_window [class="signal"] floating enable
+for_window [class="Signal"] floating enable
+for_window [class="Fluffychat"] floating enable
+for_window [class="Proton VPN"] floating enable
 for_window [class="Dino"] floating enable
+for_window [class="ownCloud"] floating enable
 for_window [class="firefox"] move container to workspace 1
-for_window [class="eu.betterbird.Betterbird"] move container to workspace 4
+for_window [class="thunderbird"] move container to workspace 4
+for_window [class="Dolphin"] move container to workspace 3
 for_window [class="Thunar"] move container to workspace 3
-for_window [class="steam_app_1364781"] border none, fullscreen enable
 

i3/i3blocks.conf

@@ -1,182 +0,0 @@
-# i3blocks config file changed for EndeavourOS-i3 setup
-
-# source is available here:
-# https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/etc/skel/.config/i3/i3blocks.conf
-# Maintainer: joekamprad [joekamprad //a_t// endeavouros.com]
-# Former Visual Designer: Florent Valetti [@FLVAL EndeavourOS]
-# created for i3wm setup on EndeavourOS
-# https://endeavouros.com
-
-# cheatsheet for icon fonts used on the block-bar:
-# https://fontawesome.com/v4.7/cheatsheet/
-
-# --> to update this run the following command:
-# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/etc/skel/.config/i3/i3blocks.conf -P ~/.config/i3/
-
-# Please see man i3blocks for a complete reference!
-# The man page is also hosted at http://vivien.github.io/i3blocks
-
-
-# List of valid properties:
-#
-# align
-# color
-# command
-# full_text
-# instance
-# interval
-# label
-# min_width
-# name
-# separator
-# separator_block_width
-# short_text
-# signal
-# urgent
-
-# Global properties
-#
-# The top properties below are applied to every block, but can be overridden.
-separator=false
-markup=pango
-
-#[Weather]
-#command=~/.config/i3/scripts/openweather
-#interval=1800
-#color=#7275b3
-
-[terminal]
-full_text= 
-color=#807dfe
-command=i3-msg -q exec xfce4-terminal
-
-[browser]
-full_text= 
-color=#ff7f81
-command=i3-msg -q exec firefox
-
-[files]
-full_text= 
-color=#7f3fbf
-command=i3-msg -q exec thunar ~/
-
-#[mail]
-#full_text= 
-#color=#dbcb75
-#command=i3-msg -q exec thunderbird
-
-[simple-2]
-full_text=: :
-color=#717171
-
-# Disk usage
-#
-# The directory defaults to $HOME if the instance is not specified.
-# The script may be called with a optional argument to set the alert
-# (defaults to 10 for 10%).
-[disk]
-label= 
-instance=/
-command=~/.config/i3/scripts/disk
-interval=30
-
-# Memory usage
-#
-# The type defaults to "mem" if the instance is not specified.
-[memory]
-label= 
-command=~/.config/i3/scripts/memory
-interval=2
-
-[cpu_usage]
-label= 
-command=~/.config/i3/scripts/cpu_usage
-#min_width=CPU: 100.00%
-interval=2
-
-[CPU-temperature]
-label=
-command=~/.config/i3/scripts/temperature
-interval=30
-#T_WARN=70
-#T_CRIT=90
-#SENSOR_CHIP=""
-# where SENSOR_CHIP can be find with sensors output
-# can be used also for GPU temperature or other temperature sensors lm-sensors detects.
-
-# showing name of connected network (enable for wifi use)
-#[net]
-#label= 
-#command=echo "$(LANG=C nmcli d | grep connected  | awk '{print $4}')"
-#interval=30
-
-[bandwidth]
-command=~/.config/i3/scripts/bandwidth2
-interval=persist
-
-#[vpn]
-#command=~/.config/i3/scripts/vpn
-#init_color=#FFFF00
-#on_color=#00FF00
-#label=VPN:
-#interval=5
-
-# Battery indicator
-[battery]
-command=~/.config/i3/scripts/battery
-# change this to battery-pinebook-pro if you are running on pinebook-pro
-label=
-interval=30
-
-[simple-2]
-full_text=: :
-color=#717171
-
-[pavucontrol]
-full_text=♪
-command=pavucontrol
-
-[volume]
-command=~/.config/i3/scripts/volume
-interval=2
-
-# display keyboard layout name
-# for keyboard layouts switcher
-# see i3 config file
-# this needs xkblayout-state installed from the AUR:
-# https://aur.archlinux.org/packages/xkblayout-state-git
-#[keyboard-layout]
-#command=~/.config/i3/scripts/keyboard-layout
-#interval=2
-
-[keybindings]
-full_text= 
-command=~/.config/i3/scripts/keyhint
-
-# power-profiles-daemon implementation:
-# needs package power-profiles-daemon installed and the service running see here:
-# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
-
-#set power-profile
-[ppd_menu]
-full_text=
-command=~/.config/i3/scripts/power-profiles
-color=#407437
-
-#Show the current power-profile
-[ppd-status]
-command=~/.config/i3/scripts/ppd-status
-interval=5
-
-[time]
-#label=
-command=date '+%a %d %b %H:%M:%S'
-interval=1
-
-[shutdown_menu]
-full_text= 
-command=~/.config/i3/scripts/powermenu
-
-[simple-2]
-full_text=: :
-color=#717171

i3/keybindings

@@ -1,106 +0,0 @@
-EndeavourOS i3wm Keybindings cheat sheet:
-
---> to update this run the following command:
-wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/keybindings -P ~/.config/i3/
-
-All sources and updates are available at GitHub:
-https://github.com/endeavouros-team/endeavouros-i3wm-setup
-
-For reference consult our WIKI:
-https://discovery.endeavouros.com/window-tiling-managers/i3-wm/
-
- = windows key
-
-# start xfce4-terminal
-+Return 
-
-# kill focused window
-+q
-
-# Application menu search by typing (fancy Rofi menu):
-+d
-
-# Window switcher menu (fancy Rofi menu):
-+t
-
-# fancy exit-menu on bottom right:
-+Shift+e
-
-# Lock the system
-# lock with a picture or blurring the screen (options in config)
-+l
-
-# reload the configuration file
-+Shift+c
-
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-+Shift+r
-
-# keybinding in fancy rofi (automated)
-F1
-
-# full keybinding list in editor:
-+F1
-
-# change window focus
-+j focus left
-+k focus down
-+b focus up
-+o focus right
-
-# alternatively, you can use the cursor keys:
-+Left focus left
-+Down focus down
-+Up focus up
-+Right focus right
-
-# move a focused window
-+Shift+j move left
-+Shift+k move down
-+Shift+b move up
-+Shift+o move right
-
-# alternatively, you can use the cursor keys:
-+Shift+Left move left
-+Shift+Down move down
-+Shift+Up move up
-+Shift+Right move right
-
-# split in horizontal orientation
-+h split h
-
-# split in vertical orientation
-+v split v
-
-# enter fullscreen mode for the focused container
-+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-+s layout stacking
-+g layout tabbed
-+e layout toggle split
-
-# toggle tiling / floating
-+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-+space focus mode_toggle
-
-# focus the parent container
-+a focus parent
-
-# focus the child container
-#+d focus child
-
-# resize floating window
-+right mouse button
-
-## Multimedia Keys
-
-# Redirect sound to headphones
-+p
-
-## App shortcuts
-+w starts Firefox
-+n starts Thunar
- Button screenshot

i3/scripts/bandwidth2

@@ -1,109 +0,0 @@
-#!/usr/bin/env bash
-#
-# Copyright (C) 2015 James Murphy
-# Licensed under the terms of the GNU GPL v2 only.
-#
-# i3blocks blocklet script to monitor bandwidth usage
-# detecting active device device
-# option to set used unit
-
-iface="${BLOCK_INSTANCE}"
-iface="${IFACE:-$iface}"
-dt="${DT:-3}"
-unit="${UNIT:-MB}"
-LABEL="${LABEL:-<span font='FontAwesome'>⇄ </span>}" # down arrow up arrow
-printf_command="${PRINTF_COMMAND:-"printf \"${LABEL}%1.0f/%1.0f %s/s\\n\", rx, wx, unit;"}"
-
-function default_interface {
-    ip route | awk '/^default via/ {print $5; exit}'
-}
-
-function check_proc_net_dev {
-    if [ ! -f "/proc/net/dev" ]; then
-        echo "/proc/net/dev not found"
-        exit 1
-    fi
-}
-
-function list_interfaces {
-    check_proc_net_dev
-    echo "Interfaces in /proc/net/dev:"
-    grep -o "^[^:]\\+:" /proc/net/dev | tr -d " :"
-}
-
-while getopts i:t:u:p:lh opt; do
-    case "$opt" in
-        i) iface="$OPTARG" ;;
-        t) dt="$OPTARG" ;;
-        u) unit="$OPTARG" ;;
-        p) printf_command="$OPTARG" ;;
-        l) list_interfaces && exit 0 ;;
-        h) printf \
-"Usage: bandwidth3 [-i interface] [-t time] [-u unit] [-p printf_command] [-l] [-h]
-Options:
--i\tNetwork interface to measure. Default determined using \`ip route\`.
--t\tTime interval in seconds between measurements. Default: 3
--u\tUnits to measure bytes in. Default: Mb
-\tAllowed units: Kb, KB, Mb, MB, Gb, GB, Tb, TB
-\tUnits may have optional it/its/yte/ytes on the end, e.g. Mbits, KByte
--p\tAwk command to be called after a measurement is made. 
-\tDefault: printf \"<span font='FontAwesome'>  </span>%%-5.1f/%%5.1f %%s/s\\\\n\", rx, wx, unit;
-\tExposed variables: rx, wx, tx, unit, iface
--l\tList available interfaces in /proc/net/dev
--h\tShow this help text
-" && exit 0;;
-    esac
-done
-
-check_proc_net_dev
-
-iface="${iface:-$(default_interface)}"
-while [ -z "$iface" ]; do
-    echo No default interface
-    sleep "$dt"
-    iface=$(default_interface)
-done
-
-case "$unit" in
-    Kb|Kbit|Kbits)   bytes_per_unit=$((1024 / 8));;
-    KB|KByte|KBytes) bytes_per_unit=$((1024));;
-    Mb|Mbit|Mbits)   bytes_per_unit=$((1024 * 1024 / 8));;
-    MB|MByte|MBytes) bytes_per_unit=$((1024 * 1024));;
-    Gb|Gbit|Gbits)   bytes_per_unit=$((1024 * 1024 * 1024 / 8));;
-    GB|GByte|GBytes) bytes_per_unit=$((1024 * 1024 * 1024));;
-    Tb|Tbit|Tbits)   bytes_per_unit=$((1024 * 1024 * 1024 * 1024 / 8));;
-    TB|TByte|TBytes) bytes_per_unit=$((1024 * 1024 * 1024 * 1024));;
-    *) echo Bad unit "$unit" && exit 1;;
-esac
-
-scalar=$((bytes_per_unit * dt))
-init_line=$(cat /proc/net/dev | grep "^[ ]*$iface:")
-if [ -z "$init_line" ]; then
-    echo Interface not found in /proc/net/dev: "$iface"
-    exit 1
-fi
-
-init_received=$(awk '{print $2}' <<< $init_line)
-init_sent=$(awk '{print $10}' <<< $init_line)
-
-(while true; do cat /proc/net/dev; sleep "$dt"; done) |\
-    stdbuf -oL grep "^[ ]*$iface:" |\
-    awk -v scalar="$scalar" -v unit="$unit" -v iface="$iface" '
-BEGIN {
-    old_received='"$init_received"'
-    old_sent='"$init_sent"'
-}
-{
-    received=$2
-    sent=$10
-    rx=(received-old_received)/scalar
-    wx=(sent-old_sent)/scalar
-    tx=rx+wx
-    old_received=received
-    old_sent=sent
-    if (rx >= 0 && wx >= 0) {
-        '"$printf_command"'
-        fflush(stdout)
-    }
-}
-'

i3/scripts/battery

@@ -1,106 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright (C) 2016 James Murphy
-# Licensed under the GPL version 2 only
-#
-# A battery indicator blocklet script for i3blocks
-
-from subprocess import check_output
-import os
-import re
-
-config = dict(os.environ)
-status = check_output(['acpi'], universal_newlines=True)
-
-if not status:
-    # stands for no battery found
-    color = config.get("color_10", "red")
-    fulltext = "<span color='{}'><span font='FontAwesome'>\uf00d \uf240</span></span>".format(color)
-    percentleft = 100
-else:
-    # if there is more than one battery in one laptop, the percentage left is
-    # available for each battery separately, although state and remaining
-    # time for overall block is shown in the status of the first battery
-    batteries = status.split("\n")
-    state_batteries=[]
-    commasplitstatus_batteries=[]
-    percentleft_batteries=[]
-    time = ""
-    for battery in batteries:
-        if battery!='':
-            state_batteries.append(battery.split(": ")[1].split(", ")[0])
-            commasplitstatus = battery.split(", ")
-            if not time:
-                time = commasplitstatus[-1].strip()
-                # check if it matches a time
-                time = re.match(r"(\d+):(\d+)", time)
-                if time:
-                    time = ":".join(time.groups())
-                    timeleft = " ({})".format(time)
-                else:
-                    timeleft = ""
-
-            p = int(commasplitstatus[1].rstrip("%\n"))
-            if p>0:
-                percentleft_batteries.append(p)
-            commasplitstatus_batteries.append(commasplitstatus)
-    state = state_batteries[0]
-    commasplitstatus = commasplitstatus_batteries[0]
-    if percentleft_batteries:
-        percentleft = int(sum(percentleft_batteries)/len(percentleft_batteries))
-    else:
-        percentleft = 0
-
-    # stands for charging
-    color = config.get("color_charging", "yellow")
-    FA_LIGHTNING = "<span color='{}'><span font='FontAwesome'>\uf0e7</span></span>".format(color)
-
-    # stands for plugged in
-    FA_PLUG = "<span font='FontAwesome'>\uf1e6</span>"
-
-    # stands for using battery
-    FA_BATTERY = "<span font='FontAwesome'>\uf240</span>"
-
-    # stands for unknown status of battery
-    FA_QUESTION = "<span font='FontAwesome'>\uf128</span>"
-
-
-    if state == "Discharging":
-        fulltext = FA_BATTERY + " "
-    elif state == "Full":
-        fulltext = FA_PLUG + " "
-        timeleft = ""
-    elif state == "Unknown":
-        fulltext = FA_QUESTION + " " + FA_BATTERY + " "
-        timeleft = ""
-    else:
-        fulltext = FA_LIGHTNING + " " + FA_PLUG + " "
-
-    def color(percent):
-        if percent < 10:
-            # exit code 33 will turn background red
-            return config.get("color_10", "#FFFFFF")
-        if percent < 20:
-            return config.get("color_20", "#FF3300")
-        if percent < 30:
-            return config.get("color_30", "#FF6600")
-        if percent < 40:
-            return config.get("color_40", "#FF9900")
-        if percent < 50:
-            return config.get("color_50", "#FFCC00")
-        if percent < 60:
-            return config.get("color_60", "#FFFF00")
-        if percent < 70:
-            return config.get("color_70", "#FFFF33")
-        if percent < 80:
-            return config.get("color_80", "#FFFF66")
-        return config.get("color_full", "#FFFFFF")
-
-    form =  '<span color="{}">{}%</span>'
-    fulltext += form.format(color(percentleft), percentleft)
-    #fulltext += timeleft
-
-print(fulltext)
-print(fulltext)
-if percentleft < 10:
-    exit(33)

i3/scripts/battery-pinebook-pro

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-
-# simple Shellscript for i3blocks on Pinebook pro
-# 05012020 geri123 //at// gmx.net Gerhard S.
-# battery-symbols: you need the awesome-terminal-font package installed
-
-PERCENT=$(cat /sys/class/power_supply/cw2015-battery/capacity)
-STATUS=$(cat /sys/class/power_supply/cw2015-battery/status)
-case $((
- $PERCENT >= 0 && $PERCENT <= 20 ? 1 :
- $PERCENT > 20 && $PERCENT <= 40 ? 2 :
- $PERCENT > 40 && $PERCENT <= 60 ? 3 :
- $PERCENT > 60 && $PERCENT <= 80 ? 4 : 5)) in
-#
-       (1) echo $STATUS:"" :$PERCENT%;;
-       (2) echo $STATUS:"" :$PERCENT%;;
-       (3) echo $STATUS:"" :$PERCENT%;;
-       (4) echo $STATUS:"" :$PERCENT%;;
-       (5) echo $STATUS:"" :$PERCENT%;;
-esac

i3/scripts/blur-lock

@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-
-# simple screenlocker using i3lock that creates ablurred screenshot to overlay
-
-PICTURE=/tmp/i3lock.png
-SCREENSHOT="scrot -z $PICTURE"
-
-BLUR="5x4"
-
-$SCREENSHOT
-magick $PICTURE -blur $BLUR $PICTURE
-i3lock -i $PICTURE
-shred $PICTURE
-rm $PICTURE

i3/scripts/cpu_usage

@@ -1,62 +0,0 @@
-#!/usr/bin/perl
-#
-# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
-# Copyright 2014 Vivien Didelot <vivien@didelot.org>
-# Copyright 2014 Andreas Guldstrand <andreas.guldstrand@gmail.com>
-#
-# Licensed under the terms of the GNU GPL v3, or any later version.
-
-use strict;
-use warnings;
-use utf8;
-use Getopt::Long;
-
-# default values
-my $t_warn = $ENV{T_WARN} // 50;
-my $t_crit = $ENV{T_CRIT} // 80;
-my $cpu_usage = -1;
-my $decimals = $ENV{DECIMALS} // 0;
-my $label = $ENV{LABEL} // "";
-
-sub help {
-    print "Usage: cpu_usage [-w <warning>] [-c <critical>] [-d <decimals>]\n";
-    print "-w <percent>: warning threshold to become yellow\n";
-    print "-c <percent>: critical threshold to become red\n";
-    print "-d <decimals>:  Use <decimals> decimals for percentage (default is $decimals) \n"; 
-    exit 0;
-}
-
-GetOptions("help|h" => \&help,
-           "w=i"    => \$t_warn,
-           "c=i"    => \$t_crit,
-           "d=i"    => \$decimals,
-);
-
-# Get CPU usage
-$ENV{LC_ALL}="en_US"; # if mpstat is not run under en_US locale, things may break, so make sure it is
-open (MPSTAT, 'mpstat 1 1 |') or die;
-while (<MPSTAT>) {
-    if (/^.*\s+(\d+\.\d+)[\s\x00]?$/) {
-        $cpu_usage = 100 - $1; # 100% - %idle
-        last;
-    }
-}
-close(MPSTAT);
-
-$cpu_usage eq -1 and die 'Can\'t find CPU information';
-
-# Print short_text, full_text
-print "${label}";
-printf "%02.${decimals}f%%\n", $cpu_usage;
-print "${label}";
-printf "%02.${decimals}f%%\n", $cpu_usage;
-
-# Print color, if needed
-if ($cpu_usage >= $t_crit) {
-    print "#FF0000\n";
-    exit 33;
-} elsif ($cpu_usage >= $t_warn) {
-    print "#FFFC00\n";
-}
-
-exit 0;

i3/scripts/disk

@@ -1,48 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-DIR="${DIR:-$BLOCK_INSTANCE}"
-DIR="${DIR:-$HOME}"
-ALERT_LOW="${ALERT_LOW:-$1}"
-ALERT_LOW="${ALERT_LOW:-10}" # color will turn red under this value (default: 10%)
-
-LOCAL_FLAG="-l"
-if [ "$1" = "-n" ] || [ "$2" = "-n" ]; then
-    LOCAL_FLAG=""
-fi
-
-df -h -P $LOCAL_FLAG "$DIR" | awk -v label="$LABEL" -v alert_low=$ALERT_LOW '
-/\/.*/ {
-	# full text
-	print label $4
-
-	# short text
-	print label $4
-
-	use=$5
-
-	# no need to continue parsing
-	exit 0
-}
-
-END {
-	gsub(/%$/,"",use)
-	if (100 - use < alert_low) {
-		# color
-		print "#FF0000"
-	}
-}
-'

i3/scripts/dpms-inhibit

@@ -1,57 +0,0 @@
-#!/bin/bash
-# Suspends xset screensaver/DPMS blanking while any visible workspace has a
-# fullscreen window (video, game, presentation), restores normal timeouts
-# once nothing is fullscreen.
-interval="${1:-5}"
-
-# Single-instance lock: i3 restarts/reloads re-run our autostart exec, so
-# without this, stray duplicate loops accumulate and race each other's state.
-# Per session, so a loop lingering from a logged-out session can't block this one.
-exec 9>"/tmp/.dpms-inhibit-$(id -u)-${XDG_SESSION_ID:-0}.lock"
-flock -n 9 || exit 0
-
-has_fullscreen() {
-    python3 - <<'EOF'
-import json, subprocess, sys
-
-def is_fullscreen(node):
-    if node.get('window') and node.get('fullscreen_mode', 0) > 0: return True
-    return any(is_fullscreen(c) for c in node.get('nodes', []) + node.get('floating_nodes', []))
-
-def find_ws(node, name):
-    if node.get('type') == 'workspace' and node.get('name') == name: return node
-    for c in node.get('nodes', []) + node.get('floating_nodes', []):
-        r = find_ws(c, name)
-        if r: return r
-
-try:
-    wss = json.loads(subprocess.check_output(['i3-msg', '-t', 'get_workspaces'], stderr=subprocess.DEVNULL))
-    tree = json.loads(subprocess.check_output(['i3-msg', '-t', 'get_tree'], stderr=subprocess.DEVNULL))
-    for ws in wss:
-        if ws.get('visible'):
-            node = find_ws(tree, ws['name'])
-            if node and is_fullscreen(node):
-                sys.exit(0)
-except Exception:
-    pass
-sys.exit(1)
-EOF
-}
-
-inhibited=0
-while true; do
-    # our i3 is gone (logged out): don't linger into the next session
-    i3-msg -t get_version >/dev/null 2>&1 || exit 0
-    if has_fullscreen; then
-        xset s off
-        xset -dpms
-        inhibited=1
-    else
-        if [ "$inhibited" -eq 1 ]; then
-            xset s 300 300
-            xset dpms 0 0 900
-            inhibited=0
-        fi
-    fi
-    sleep "$interval"
-done

i3/scripts/freeze-toggle

@@ -1,19 +0,0 @@
-#!/bin/bash
-# Freeze / resume the focused window's process tree (SIGSTOP / SIGCONT).
-pid=$(xdotool getactivewindow getwindowpid 2>/dev/null) || exit 1
-
-# collect pid plus all descendants (Wine/Proton games spawn several)
-descendants() {
-    local p
-    for p in $(pgrep -P "$1"); do
-        echo "$p"
-        descendants "$p"
-    done
-}
-pids="$pid $(descendants "$pid")"
-name=$(ps -o comm= -p "$pid")
-
-case "$(ps -o state= -p "$pid")" in
-    T*) kill -CONT $pids && notify-send -t 1500 "Resumed" "$name ($pid)" ;;
-    *)  kill -STOP $pids && notify-send -t 1500 "Frozen" "$name ($pid)" ;;
-esac

i3/scripts/guide-freeze

@@ -1,50 +0,0 @@
-#!/usr/bin/env python3
-# Freeze/resume the focused window on the controller's Home/guide button (BTN_MODE).
-# Stdlib only: reads raw evdev events. Gamepads are readable by the seat user.
-import glob, os, select, signal, struct, subprocess, time
-
-EV_KEY, BTN_MODE = 1, 0x13c
-EVENT = struct.Struct('llHHi')  # struct input_event
-LONG_BITS = struct.calcsize('l') * 8
-CMD = [os.path.expanduser('~/.config/i3/scripts/freeze-toggle')]
-
-signal.signal(signal.SIGCHLD, signal.SIG_IGN)  # auto-reap child processes
-
-def has_btn_mode(path):
-    try:
-        with open(f'/sys/class/input/{os.path.basename(path)}/device/capabilities/key') as f:
-            words = f.read().split()
-    except OSError:
-        return False
-    bits = 0
-    for w in words:
-        bits = bits << LONG_BITS | int(w, 16)
-    return bits >> BTN_MODE & 1
-
-fds = {}  # fd -> device path
-last = 0.0
-rescan = 0.0
-while True:
-    if time.monotonic() >= rescan:  # pick up hotplugged controllers
-        for path in glob.glob('/dev/input/event*'):
-            if path not in fds.values() and has_btn_mode(path):
-                try:
-                    fds[os.open(path, os.O_RDONLY)] = path
-                except OSError:
-                    pass
-        rescan = time.monotonic() + 2
-    ready, _, _ = select.select(list(fds), [], [], 2)
-    for fd in ready:
-        try:
-            data = os.read(fd, EVENT.size * 64)
-        except OSError:  # controller unplugged
-            os.close(fd)
-            del fds[fd]
-            continue
-        for sec, usec, type_, code, value in EVENT.iter_unpack(data):
-            if type_ == EV_KEY and code == BTN_MODE and value == 1:
-                now = sec + usec / 1e6
-                if now - last < 0.4:  # GuliKit's Home button double-fires ~10ms apart
-                    continue
-                last = now
-                subprocess.Popen(CMD, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)

i3/scripts/keyhint

@@ -1,27 +0,0 @@
-#!/usr/bin/env bash
-
-# simple yad gui to show default keybindings
-
-Main() {
-    source /usr/share/endeavouros/scripts/eos-script-lib-yad || return 1
-
-    local command=(
-        eos_yad --title="EndeavourOS i3-wm keybindings:" --no-buttons --geometry=400x345-15-400 --list
-        --column=key: --column=description: --column=command:
-        "ESC" "close this app" ""
-        "=" "modkey" "(set mod Mod4)"
-        "+enter" "open a terminal" ""
-        "+Shift+n" "new empty workspace" ""
-        "+w" "open Browser" ""
-        "+n" "open Filebrowser" ""
-        "+d" "app menu" ""
-        "+q" "close focused app" ""
-        "Print-key" "screenshot" ""
-        "+Shift+e" "logout menu" ""
-        "F1" "open keybinding helper" ""
-    )
-
-    "${command[@]}"
-}
-
-Main "$@"

i3/scripts/lock

@@ -1,4 +0,0 @@
-#!/bin/bash
-# Invoked by xss-lock on idle (after 5min) and before suspend. Idle locking
-# during fullscreen is suppressed by dpms-inhibit.
-exec ~/.config/i3/scripts/lock-now "$1"

i3/scripts/lock-now

@@ -1,11 +0,0 @@
-#!/bin/bash
-wall_dir="${1:?wallpaper directory required}"
-img=$(find "$wall_dir" -type f \( -iname "*.jpg" -o -iname "*.jpeg" -o -iname "*.png" \) | shuf -n1)
-tmp=/tmp/lockscreen.png
-res=$(xrandr --current | awk '/ connected/ {getline; print $1; exit}')
-: "${res:=1920x1080}"
-if [ -n "$img" ] && convert "$img" -resize "${res}^" -gravity Center -extent "$res" "$tmp" 2>/dev/null; then
-    exec i3lock -i "$tmp" --nofork
-else
-    exec i3lock -c 000000 --nofork
-fi

i3/scripts/lock-then-suspend

@@ -1,12 +0,0 @@
-#!/bin/bash
-wall_dir="${1:?wallpaper directory required}"
-img=$(find "$wall_dir" -type f \( -iname "*.jpg" -o -iname "*.jpeg" -o -iname "*.png" \) | shuf -n1)
-tmp=/tmp/lockscreen.png
-res=$(xrandr --current | awk '/ connected/ {getline; print $1; exit}')
-: "${res:=1920x1080}"
-if [ -n "$img" ] && convert "$img" -resize "${res}^" -gravity Center -extent "$res" "$tmp" 2>/dev/null; then
-    i3lock -i "$tmp"
-else
-    i3lock -c 000000
-fi
-systemctl suspend

i3/scripts/memory

@@ -1,69 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-TYPE="${BLOCK_INSTANCE:-mem}"
-
-awk -v type=$TYPE '
-/^MemTotal:/ {
-	mem_total=$2
-}
-/^MemFree:/ {
-	mem_free=$2
-}
-/^Buffers:/ {
-	mem_free+=$2
-}
-/^Cached:/ {
-	mem_free+=$2
-}
-/^SwapTotal:/ {
-	swap_total=$2
-}
-/^SwapFree:/ {
-	swap_free=$2
-}
-END {
-	if (type == "swap") {
-		free=swap_free/1024/1024
-		used=(swap_total-swap_free)/1024/1024
-		total=swap_total/1024/1024
-	} else {
-		free=mem_free/1024/1024
-		used=(mem_total-mem_free)/1024/1024
-		total=mem_total/1024/1024
-	}
-
-	pct=0
-	if (total > 0) {
-		pct=used/total*100
-	}
-
-	# full text
-	# printf("%.1fG/%.1fG (%.f%%)\n", used, total, pct)
-
-	# short text
-	printf("%02.f%%\n", pct)
-
-	# color
-	if (pct > 90) {
-		print("#FF0000")
-	} else if (pct > 80) {
-		print("#FFAE00")
-	} else if (pct > 70) {
-		print("#FFF600")
-	}
-}
-' /proc/meminfo

i3/scripts/openweather

@@ -1,471 +0,0 @@
-#!/usr/bin/env bash
-
-# openweater - OpenWeatherMap Weather Fetcher for Waybar/Status Bars 
-#
-# Copyright (C) 2025 Johannes Kamprad
-#
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-
-# openweater - OpenWeatherMap Weather Fetcher for Waybar/Status Bars
-# Secure API key handling with configurable locations
-# including setup script and help
-# Options:
-#    -h, --help              Show this help message
-#    -c, --city-id ID        Override city ID (required if not in config)
-#    -k, --api-key KEY       Override API key (not recommended, use config file)
-#    -u, --units UNITS       Units: metric, imperial, kelvin (default: $DEFAULT_UNITS)
-#    -f, --force-refresh     Force refresh (ignore cache)
-#    --setup                 Interactive setup wizard
-#    --show-config           Show current configuration
-
-set -euo pipefail
-
-# Set C locale to avoid German decimal formatting issues
-export LC_NUMERIC=C
-export LC_ALL=C
-
-# Colors for output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-# Default configuration (no default location)
-DEFAULT_UNITS="metric"
-CONFIG_DIR="${XDG_CONFIG_HOME:-$HOME/.config}"
-CONFIG_FILE="$CONFIG_DIR/openweather/config"
-CACHE_DIR="${XDG_CACHE_HOME:-$HOME/.cache}/openweather"
-CACHE_FILE="$CACHE_DIR/weather_data"
-CACHE_DURATION=600  # 10 minutes
-
-# Logging functions
-log_error() {
-    echo -e "${RED}[ERROR]${NC} $*" >&2
-}
-
-log_warn() {
-    echo -e "${YELLOW}[WARN]${NC} $*" >&2
-}
-
-# Show help
-show_help() {
-    cat << EOF
-Usage: $(basename "$0") [OPTIONS]
-
-Secure OpenWeatherMap weather fetcher with configurable locations.
-
-Options:
-    -h, --help              Show this help message
-    -c, --city-id ID        Override city ID (required if not in config)
-    -k, --api-key KEY       Override API key (not recommended, use config file)
-    -u, --units UNITS       Units: metric, imperial, kelvin (default: $DEFAULT_UNITS)
-    -f, --force-refresh     Force refresh (ignore cache)
-    --setup                 Interactive setup wizard
-    --show-config           Show current configuration
-    
-Configuration:
-    Config file: $CONFIG_FILE
-    
-    Create config file with:
-    OPENWEATHER_API_KEY="your_api_key_here"
-    OPENWEATHER_CITY_ID="your_city_id"  # Required
-    OPENWEATHER_UNITS="metric"          # Optional
-    
-Examples:
-    $(basename "$0")                    # Use config file settings
-    $(basename "$0") --city-id 5128581   # New York
-    $(basename "$0") --units imperial    # Fahrenheit
-    $(basename "$0") --setup             # Run setup wizard
-    
-Get your free API key at: https://openweathermap.org/api
-Find city IDs at: https://openweathermap.org/find
-    
-EOF
-}
-
-# Check dependencies
-check_dependencies() {
-    local missing_deps=()
-    
-    for cmd in jq curl; do
-        if ! command -v "$cmd" >/dev/null 2>&1; then
-            missing_deps+=("$cmd")
-        fi
-    done
-    
-    if [[ ${#missing_deps[@]} -gt 0 ]]; then
-        log_error "Missing required dependencies: ${missing_deps[*]}"
-        echo "Install with: sudo pacman -S ${missing_deps[*]}"
-        exit 1
-    fi
-}
-
-# Load configuration
-load_config() {
-    # Set defaults (no default city ID)
-    OPENWEATHER_CITY_ID=""
-    OPENWEATHER_UNITS="$DEFAULT_UNITS"
-    
-    # Load from config file if it exists
-    if [[ -f "$CONFIG_FILE" ]]; then
-        source "$CONFIG_FILE"
-    fi
-    
-    # Override with environment variables if set
-    OPENWEATHER_API_KEY="${OPENWEATHER_API_KEY:-}"
-    OPENWEATHER_CITY_ID="${OPENWEATHER_CITY_ID:-}"
-    OPENWEATHER_UNITS="${OPENWEATHER_UNITS:-$DEFAULT_UNITS}"
-}
-
-# Validate API key
-validate_api_key() {
-    if [[ -z "$OPENWEATHER_API_KEY" ]]; then
-        log_error "No API key found!"
-        echo
-        echo "To fix this:"
-        echo "1. Get free API key: https://openweathermap.org/api"
-        echo "2. Run setup wizard: $0 --setup"
-        echo "3. Or set environment variable: export OPENWEATHER_API_KEY=your_key"
-        echo "4. Or create config file: $CONFIG_FILE"
-        exit 1
-    fi
-    
-    # Basic validation (OpenWeatherMap keys are typically 32 chars)
-    if [[ ${#OPENWEATHER_API_KEY} -ne 32 ]]; then
-        log_warn "API key length seems incorrect (expected 32 characters, got ${#OPENWEATHER_API_KEY})"
-    fi
-}
-
-# Validate city ID
-validate_city_id() {
-    if [[ -z "$OPENWEATHER_CITY_ID" ]]; then
-        log_error "No city ID found!"
-        echo
-        echo "To fix this:"
-        echo "1. Run setup wizard: $0 --setup"
-        echo "2. Or set environment variable: export OPENWEATHER_CITY_ID=your_city_id"
-        echo "3. Or add OPENWEATHER_CITY_ID=\"your_city_id\" to: $CONFIG_FILE"
-        echo "4. Or provide city ID via command line: $0 --city-id your_city_id"
-        echo
-        echo "Find city IDs at: https://openweathermap.org/find"
-        exit 1
-    fi
-    
-    # Basic validation (city IDs are typically numeric)
-    if [[ ! "$OPENWEATHER_CITY_ID" =~ ^[0-9]+$ ]]; then
-        log_warn "City ID format seems incorrect (expected numeric, got: $OPENWEATHER_CITY_ID)"
-    fi
-}
-
-# Setup wizard
-run_setup() {
-    echo -e "${GREEN}=== OpenWeatherMap Setup Wizard ===${NC}"
-    echo
-    
-    # Create config directory
-    mkdir -p "$(dirname "$CONFIG_FILE")"
-    
-    # Get API key
-    echo "Get your free API key at: https://openweathermap.org/api"
-    echo
-    echo -n "Enter your OpenWeatherMap API key: "
-    read -r api_key
-    
-    if [[ -z "$api_key" ]]; then
-        log_error "API key cannot be empty"
-        exit 1
-    fi
-    
-    # Get city ID (required)
-    echo
-    echo "Find your city ID at: https://openweathermap.org/find"
-    echo -n "Enter city ID: "
-    read -r city_id
-    
-    if [[ -z "$city_id" ]]; then
-        log_error "City ID cannot be empty"
-        exit 1
-    fi
-    
-    # Get units (optional)
-    echo
-    echo "Available units: metric (°C), imperial (°F), kelvin (K)"
-    echo -n "Enter units [metric]: "
-    read -r units
-    units="${units:-metric}"
-    
-    # Write config file
-    cat > "$CONFIG_FILE" << EOF
-# OpenWeatherMap Configuration
-# Generated by $(basename "$0") setup wizard on $(date)
-
-# Your API key from https://openweathermap.org/api
-OPENWEATHER_API_KEY="$api_key"
-
-# City ID from https://openweathermap.org/find
-OPENWEATHER_CITY_ID="$city_id"
-
-# Units: metric, imperial, kelvin
-OPENWEATHER_UNITS="$units"
-EOF
-
-    # Set secure permissions
-    chmod 600 "$CONFIG_FILE"
-    
-    echo
-    echo -e "${GREEN}✅ Configuration saved to: $CONFIG_FILE${NC}"
-    echo -e "${GREEN}✅ File permissions set to 600 (user read/write only)${NC}"
-    echo
-    echo "Testing configuration..."
-    
-    # Test the configuration
-    OPENWEATHER_API_KEY="$api_key"
-    OPENWEATHER_CITY_ID="$city_id"
-    OPENWEATHER_UNITS="$units"
-    
-    if fetch_weather_data; then
-        echo -e "${GREEN}✅ Configuration test successful!${NC}"
-    else
-        log_error "Configuration test failed. Please check your API key and city ID."
-        exit 1
-    fi
-}
-
-# Show current configuration
-show_config() {
-    echo "=== Current Configuration ==="
-    echo "Config file: $CONFIG_FILE"
-    echo "Cache file: $CACHE_FILE"
-    echo "Cache duration: ${CACHE_DURATION}s"
-    echo
-    
-    if [[ -f "$CONFIG_FILE" ]]; then
-        echo "Configuration:"
-        echo "  API Key: ${OPENWEATHER_API_KEY:0:8}... (${#OPENWEATHER_API_KEY} chars)"
-        echo "  City ID: $OPENWEATHER_CITY_ID"
-        echo "  Units: $OPENWEATHER_UNITS"
-    else
-        echo "❌ No configuration file found at: $CONFIG_FILE"
-        echo "Run: $0 --setup"
-    fi
-}
-
-# Check cache validity
-is_cache_valid() {
-    [[ -f "$CACHE_FILE" ]] && \
-    [[ $(($(date +%s) - $(stat -c %Y "$CACHE_FILE" 2>/dev/null || echo 0))) -lt $CACHE_DURATION ]]
-}
-
-# Fetch weather data from API
-fetch_weather_data() {
-    local url="https://api.openweathermap.org/data/2.5/weather?id=${OPENWEATHER_CITY_ID}&units=${OPENWEATHER_UNITS}&appid=${OPENWEATHER_API_KEY}"
-    
-    local response
-    if ! response=$(curl -sf "$url" 2>/dev/null); then
-        log_error "Failed to fetch weather data from API"
-        return 1
-    fi
-    
-    # Validate JSON response
-    if ! echo "$response" | jq . >/dev/null 2>&1; then
-        log_error "Invalid JSON response from API"
-        return 1
-    fi
-    
-    # Check for API error
-    local api_code
-    api_code=$(echo "$response" | jq -r '.cod // empty')
-    if [[ "$api_code" != "200" ]]; then
-        local api_message
-        api_message=$(echo "$response" | jq -r '.message // "Unknown API error"')
-        log_error "API Error ($api_code): $api_message"
-        return 1
-    fi
-    
-    # Cache the response
-    mkdir -p "$CACHE_DIR"
-    echo "$response" > "$CACHE_FILE"
-    
-    return 0
-}
-
-# Get weather data (from cache or API)
-get_weather_data() {
-    local force_refresh="${1:-false}"
-    
-    if [[ "$force_refresh" != "true" ]] && is_cache_valid; then
-        cat "$CACHE_FILE"
-    else
-        if fetch_weather_data; then
-            cat "$CACHE_FILE"
-        else
-            # Fallback to cache if available
-            if [[ -f "$CACHE_FILE" ]]; then
-                log_warn "Using stale cache data due to API failure"
-                cat "$CACHE_FILE"
-            else
-                return 1
-            fi
-        fi
-    fi
-}
-
-# Calculate wind direction
-get_wind_direction() {
-    local degrees="$1"
-    local directions=(N NNE NE ENE E ESE SE SSE S SSW SW WSW W WNW NW NNW)
-    local index
-    index=$(awk "BEGIN {print int(($degrees % 360) / 22.5)}")
-    echo "${directions[$index]}"
-}
-
-# Get weather icon
-get_weather_icon() {
-    local condition="$1"
-    case "$condition" in
-        'Clear')        echo "☀" ;;  # Clear sky
-        'Clouds')       echo "☁" ;;  # Cloudy
-        'Rain'|'Drizzle') echo "🌧" ;;  # Rain
-        'Snow')         echo "❄" ;;  # Snow
-        'Thunderstorm') echo "⛈" ;;  # Thunder
-        'Mist'|'Fog')   echo "🌫" ;;  # Fog
-        *)              echo "🌤" ;;  # Default
-    esac
-}
-
-# Safe number formatting (handles locale issues)
-safe_printf() {
-    local format="$1"
-    local number="$2"
-    
-    # Validate number is actually numeric
-    if [[ ! "$number" =~ ^-?[0-9]+(\.[0-9]+)?$ ]]; then
-        echo "0.0"
-        return 1
-    fi
-    
-    # Use awk for reliable formatting regardless of locale
-    awk "BEGIN {printf \"$format\", $number}"
-}
-
-# Format weather output
-format_weather() {
-    local weather_data="$1"
-    
-    # Parse weather data with error checking
-    local condition temp wind_speed_ms wind_deg
-    condition=$(echo "$weather_data" | jq -r '.weather[0].main // "Unknown"')
-    temp=$(echo "$weather_data" | jq -r '.main.temp // "0"')
-    wind_speed_ms=$(echo "$weather_data" | jq -r '.wind.speed // "0"')
-    wind_deg=$(echo "$weather_data" | jq -r '.wind.deg // "0"')
-    
-    # Validate parsed data
-    [[ "$condition" == "null" ]] && condition="Unknown"
-    [[ "$temp" == "null" ]] && temp="0"
-    [[ "$wind_speed_ms" == "null" ]] && wind_speed_ms="0"
-    [[ "$wind_deg" == "null" ]] && wind_deg="0"
-    
-    # Format temperature with safe formatting
-    local temp_formatted
-    temp_formatted=$(safe_printf "%.1f" "$temp")
-    
-    # Convert wind speed to km/h with safe formatting
-    local wind_speed_kmh
-    wind_speed_kmh=$(awk "BEGIN {printf \"%.1f\", ($wind_speed_ms + 0) * 3.6}")
-    
-    # Get wind direction
-    local wind_dir
-    wind_dir=$(get_wind_direction "$wind_deg")
-    
-    # Get weather icon
-    local icon
-    icon=$(get_weather_icon "$condition")
-    
-    # Format unit symbol
-    local unit_symbol
-    case "$OPENWEATHER_UNITS" in
-        "imperial") unit_symbol="°F" ;;
-        "kelvin")   unit_symbol="K" ;;
-        *)          unit_symbol="°C" ;;
-    esac
-    
-    # Output formatted weather
-    echo "${icon} ${temp_formatted}${unit_symbol}, ${wind_speed_kmh} km/h ${wind_dir}"
-}
-
-# Main function
-main() {
-    local city_id_override=""
-    local api_key_override=""
-    local units_override=""
-    local force_refresh="false"
-    
-    # Parse command line arguments
-    while [[ $# -gt 0 ]]; do
-        case $1 in
-            -h|--help)
-                show_help
-                exit 0
-                ;;
-            -c|--city-id)
-                city_id_override="$2"
-                shift 2
-                ;;
-            -k|--api-key)
-                api_key_override="$2"
-                shift 2
-                ;;
-            -u|--units)
-                units_override="$2"
-                shift 2
-                ;;
-            -f|--force-refresh)
-                force_refresh="true"
-                shift
-                ;;
-            --setup)
-                check_dependencies
-                run_setup
-                exit 0
-                ;;
-            --show-config)
-                load_config
-                show_config
-                exit 0
-                ;;
-            *)
-                log_error "Unknown option: $1"
-                show_help
-                exit 1
-                ;;
-        esac
-    done
-    
-    # Check dependencies
-    check_dependencies
-    
-    # Load configuration
-    load_config
-    
-    # Apply overrides
-    [[ -n "$city_id_override" ]] && OPENWEATHER_CITY_ID="$city_id_override"
-    [[ -n "$api_key_override" ]] && OPENWEATHER_API_KEY="$api_key_override"
-    [[ -n "$units_override" ]] && OPENWEATHER_UNITS="$units_override"
-    
-    # Validate configuration
-    validate_api_key
-    validate_city_id
-    
-    # Get and format weather data
-    local weather_data
-    if weather_data=$(get_weather_data "$force_refresh"); then
-        format_weather "$weather_data"
-    else
-        echo "⚠️ Weather data unavailable"
-        exit 1
-    fi
-}
-
-# Run main function
-main "$@"

i3/scripts/power-profiles

@@ -1,64 +0,0 @@
-#!/usr/bin/env bash
-
-# Simple power-profiles-daemon switcher using rofi and static theme, with notification
-#
-# Copyright (C) 2025 Johannes Kamprad
-#
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# needs rofi config:
-# $HOME/.config/rofi/powermenu.rasi
-
-ROFI_THEME="${HOME}/.config/rofi/power-profiles.rasi"
-
-# Dependency checks
-command -v powerprofilesctl >/dev/null 2>&1 || { echo "powerprofilesctl not found"; exit 1; }
-command -v rofi >/dev/null 2>&1 || { echo "rofi not found"; exit 1; }
-if ! command -v notify-send >/dev/null 2>&1; then
-  notify_send_missing=true
-fi
-
-current_profile="$(powerprofilesctl get 2>/dev/null)"
-ROFI_ARGS=(-dmenu -i -theme "$ROFI_THEME" -p "Change Profile" -mesg "<b>Current used:</b> $current_profile" -markup-rows)
-
-# Menu entries
-cancel="  Cancel"
-perf="  Performance"
-balanced="  Balanced"
-powersave="  Power Saver"
-# sets chancel to be on top
-options="$cancel"
-
-if powerprofilesctl list | grep -q "performance"; then
-  options="$options\n$perf"
-fi
-if powerprofilesctl list | grep -q "balanced"; then
-  options="$options\n$balanced"
-fi
-if powerprofilesctl list | grep -q "power-saver"; then
-  options="$options\n$powersave"
-fi
-
-# Show menu
-chosen="$(echo -e "$options" | rofi "${ROFI_ARGS[@]}")"
-
-# Run selection
-case $chosen in
-    "$perf")
-        powerprofilesctl set performance
-        ;;
-    "$balanced")
-        powerprofilesctl set balanced
-        ;;
-    "$powersave")
-        powerprofilesctl set power-saver
-        ;;
-    "$cancel"|"")
-        exit 0
-        ;;
-esac
-
-# Send notification if available
-if [[ "$chosen" != "$cancel" && -z "${notify_send_missing}" ]]; then
-  notify-send -i dialog-information "Power Profile Changed" "New profile: ${chosen}"
-fi

i3/scripts/powermenu

@@ -1,81 +0,0 @@
-#!/usr/bin/env bash
-
-#
-# powermenu - a very simple rofi powermenu
-#
-# Copyright (C) 2025 Johannes Kamprad
-#
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# needs rofi config:
-# $HOME/.config/rofi/powermenu.rasi
-# set to be used in i3wm
-
-ROFI_THEME="${HOME}/.config/rofi/powermenu.rasi"
-# Define possible lock scripts/commands (edit this list as you like)
-LOCK_SCRIPTS=("${HOME}/.config/i3/scripts/blur-lock" "i3lock")
-
-# Find available lock script
-find_lock_script() {
-    for script in "${LOCK_SCRIPTS[@]}"; do
-        # Handle command names vs full paths
-        if [[ "$script" =~ ^[a-zA-Z0-9_-]+$ ]]; then
-            # It's a command name, check if available
-            if command -v "$script" >/dev/null 2>&1; then
-                echo "$script"
-                return 0
-            fi
-        else
-            # It's a path, check if file exists and is executable
-            if [[ -x "$script" ]]; then
-                echo "$script"
-                return 0
-            fi
-        fi
-    done
-    return 1
-}
-
-# Menu entries
-chancel=" Cancel"
-lock="  Lock"
-logout="  Logout"
-reboot="  Reboot"
-shutdown="  Shutdown"
-suspend="  Suspend"
-hibernate="  Hibernate"
-
-
-# Add lock only if script is found
-if lockcmd="$(find_lock_script)"; then
-    options="$chancel\n$lock\n$logout\n$reboot\n$shutdown\n$suspend\n$hibernate"
-else
-    options="$chancel\n$logout\n$reboot\n$shutdown\n$suspend\n$hibernate"
-fi
-
-chosen="$(echo -e "$options" | rofi -dmenu -i -p "Power Menu" \
-    -theme $ROFI_THEME)"
-
-case $chosen in
-    "$lock")
-        $lockcmd
-        ;;
-    "$cancel"|"")
-        exit 0
-        ;;
-    "$logout")
-        i3-msg exit
-        ;;
-    "$reboot")
-        systemctl reboot
-        ;;
-    "$shutdown")
-        systemctl poweroff
-        ;;
-    "$suspend")
-        systemctl suspend
-        ;;
-    "$hibernate")
-        systemctl hibernate
-        ;;
-esac

i3/scripts/ppd-status

@@ -1,25 +0,0 @@
-#!/usr/bin/env bash
-
-
-# power-profiles-daemon implementation:
-# needs package power-profiles-daemon installed and the service running see here:
-# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
-# used in i3-blocks: ~/.config/i3/i3blocks.conf together with: ~/.config/i3/scripts/power-profiles
-
-
-# assign tags or translations to each profile
-declare -A tags
-tags=(
-  [performance]="Performance"
-  [balanced]="Balanced"
-  [power-saver]="Power saver"
-)
-
-# Get current profile 
-current_profile=$(/usr/bin/powerprofilesctl get)
-
-# Get tag from the array
-profile_tag=${tags[$current_profile]}
-
-# Show tag on i3block
-echo "${profile_tag:-$current_profile}"

i3/scripts/temperature

@@ -1,75 +0,0 @@
-#!/usr/bin/env perl
-
-# Copyright 2014 Pierre Mavro <deimos at deimos dot fr>
-# Copyright 2014 Vivien Didelot <vivien at didelot.org>
-# Copyright 2014 Andreas Guldstrand <andreas.guldstrand at gmail dot com>
-# Copyright 2014 Benjamin Chretien <chretien at lirmm dot fr>
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# Edited by Andreas Lindlbauer <endeavouros.mousily@aleeas.com>
-
-use strict;
-use warnings;
-use utf8;
-use Getopt::Long;
-
-binmode(STDOUT, ":utf8");
-
-# default values
-my $t_warn = $ENV{T_WARN} || 70;
-my $t_crit = $ENV{T_CRIT} || 90;
-my $chip = $ENV{SENSOR_CHIP} || "";
-my $temperature = -9999;
-my $label = "😀 ";
-
-sub help {
-    print "Usage: temperature [-w <warning>] [-c <critical>] [--chip <chip>]\n";
-    print "-w <percent>: warning threshold to become yellow\n";
-    print "-c <percent>: critical threshold to become red\n";
-    print "--chip <chip>: sensor chip\n";
-    exit 0;
-}
-
-GetOptions("help|h" => \&help,
-           "w=i"    => \$t_warn,
-           "c=i"    => \$t_crit,
-           "chip=s" => \$chip);
-
-# Get chip temperature
-open (SENSORS, "sensors -u $chip |") or die;
-while (<SENSORS>) {
-    if (/^\s+temp1_input:\s+[\+]*([\-]*\d+\.\d)/) {
-        $temperature = $1;
-        last;
-    }
-}
-close(SENSORS);
-
-$temperature eq -9999 and die 'Cannot find temperature';
-
-if ($temperature < 45) {
-  $label = '';
-} elsif ($temperature < 55) {
-  $label = '';
-} elsif ($temperature < 65) {
-  $label = '';
-} elsif ($temperature < 75) {
-  $label = '';
-} else {
-  $label = '';
-}
-# Print short_text, full_text
-print "${label}";
-print " $temperature°C\n";
-print "${label}";
-print " $temperature°C\n";
-
-# Print color, if needed
-if ($temperature >= $t_crit) {
-    print "#FF0000\n";
-    exit 33;
-} elsif ($temperature >= $t_warn) {
-    print "#FFFC00\n";
-}
-
-exit 0;

i3/scripts/volume

@@ -1,46 +0,0 @@
-#!/usr/bin/env bash
-# i3blocks volume block for PipeWire (PulseAudio compatible)
-
-STEP=${1:-5%}
-
-# Default sink
-SINK=$(pactl info | awk '/Default Sink/ {print $3}')
-[[ -z "$SINK" ]] && { echo "No audio"; exit 0; }
-
-# Handle scroll/middle-click
-case "$BLOCK_BUTTON" in
-    3) pactl set-sink-mute "$SINK" toggle ;;   # right click = mute/unmute
-    4) pactl set-sink-volume "$SINK" +$STEP ;; # scroll up
-    5) pactl set-sink-volume "$SINK" -$STEP ;; # scroll down
-esac
-
-# Get current volume (front-left channel)
-VOL=$(pactl list sinks | awk -v s="$SINK" '
-    $0 ~ "Name: " s {found=1}
-    found && /Volume:/ {gsub("%","",$5); print $5; exit}
-')
-
-# Get mute state
-MUTED=$(pactl list sinks | awk -v s="$SINK" '
-    $0 ~ "Name: " s {found=1}
-    found && /Mute:/ {print $2; exit}
-')
-
-# Choose symbol
-AUDIO_HIGH=''
-AUDIO_MED=''
-AUDIO_LOW=''
-AUDIO_MUTED=''
-MED_THRESH=50
-LOW_THRESH=0
-
-if [[ "$MUTED" == "no" ]]; then
-    SYMB=$AUDIO_HIGH
-    [[ $VOL -le $MED_THRESH ]] && SYMB=$AUDIO_MED
-    [[ $VOL -le $LOW_THRESH ]] && SYMB=$AUDIO_LOW
-else
-    SYMB=$AUDIO_MUTED
-fi
-
-# Single-line output for i3blocks
-echo "${SYMB} ${VOL}%"

i3/scripts/vpn

@@ -1,25 +0,0 @@
-#!/usr/bin/env sh
-
-# Parses output from nmcli to show the current connected VPN name/status for i3block
-# Source: https://github.com/vivien/i3blocks-contrib/tree/master/nm-vpn
-# uncomment in $HOME/.config/i3/i3blocks.conf if you want to use it
-
-init_color=${init_color:-#FFFF00}
-on_color=${on_color:-#00FF00}
-export init_color on_color
-nmcli -t connection show --active | awk -F ':' '
-BEGIN {
-    init_color=ENVIRON["init_color"]
-    on_color=ENVIRON["on_color"]
-}
-$3=="vpn" {
-    name=$1
-    status="INIT"
-    color=init_color
-}
-$3=="tun" || ($4~/^tap/ || $3~/^tap/) {
-    if(!name) name=$1
-    status="ON"
-    color=on_color
-}
-END {if(status) printf("%s\n%s\n%s\n", name, status, color)}'

i3/scripts/wallpaper-rotate

@@ -1,44 +0,0 @@
-#!/bin/bash
-wall_dir="${1:?wallpaper directory required}"
-interval="${2:-1800}"
-
-pick_wall() {
-    find "$wall_dir" -type f \( -iname "*.jpg" -o -iname "*.jpeg" -o -iname "*.png" \) | shuf -n1
-}
-
-set_wall() { [ -n "$1" ] && xwallpaper --zoom "$1"; }
-
-has_fullscreen() {
-    python3 - <<'EOF'
-import json, subprocess, sys
-
-def is_fullscreen(node):
-    if node.get('window') and node.get('fullscreen_mode', 0) > 0: return True
-    return any(is_fullscreen(c) for c in node.get('nodes', []) + node.get('floating_nodes', []))
-
-def find_ws(node, name):
-    if node.get('type') == 'workspace' and node.get('name') == name: return node
-    for c in node.get('nodes', []) + node.get('floating_nodes', []):
-        r = find_ws(c, name)
-        if r: return r
-
-try:
-    wss = json.loads(subprocess.check_output(['i3-msg', '-t', 'get_workspaces'], stderr=subprocess.DEVNULL))
-    tree = json.loads(subprocess.check_output(['i3-msg', '-t', 'get_tree'], stderr=subprocess.DEVNULL))
-    for ws in wss:
-        if ws.get('visible'):
-            node = find_ws(tree, ws['name'])
-            if node and is_fullscreen(node):
-                sys.exit(0)
-except Exception:
-    pass
-sys.exit(1)
-EOF
-}
-
-# Initial wallpaper
-set_wall "$(pick_wall)"
-
-while sleep "$interval"; do
-    has_fullscreen || set_wall "$(pick_wall)"
-done

mesa/drirc

@@ -1,7 +0,0 @@
-<driconf>
-  <device>
-    <application name="Login greeters" executable_regexp=".*greeter.*">
-      <option name="adaptive_sync" value="false" />
-    </application>
-  </device>
-</driconf>

nvim-server/init.lua

@@ -1,110 +0,0 @@
--- Minimal server editor config
--- Launch with: NVIM_APPNAME=nvim-server nvim
-
--------------------- Options --------------------
-vim.g.mapleader = ","
-vim.opt.number = true
-vim.opt.cursorline = true
-vim.opt.expandtab = true
-vim.opt.tabstop = 4
-vim.opt.shiftwidth = 4
-vim.opt.softtabstop = 4
-vim.opt.autoindent = true
-vim.opt.smartindent = true
-vim.opt.hlsearch = true
-vim.opt.incsearch = true
-vim.opt.ignorecase = true
-vim.opt.smartcase = true
-vim.opt.splitright = true
-vim.opt.splitbelow = true
-vim.opt.termguicolors = true
-vim.opt.scrolloff = 8
-vim.opt.signcolumn = "no"
-vim.opt.updatetime = 250
-vim.opt.undofile = true
-
--------------------- Clipboard --------------------
---vim.opt.clipboard = 'unnamedplus'
-
-vim.g.clipboard = {
-  name = 'OSC 52',
-  copy = {
-    ['+'] = require('vim.ui.clipboard.osc52').copy('+'),
-    ['*'] = require('vim.ui.clipboard.osc52').copy('*'),
-  },
-  paste = {
-    ['+'] = require('vim.ui.clipboard.osc52').paste('+'),
-    ['*'] = require('vim.ui.clipboard.osc52').paste('*'),
-  },
-}
-vim.keymap.set("v", "<leader>y", '"+y')
-vim.keymap.set("n", "<leader>Y", '"+yg_')
-vim.keymap.set("n", "<leader>y", '"+y')
-vim.keymap.set("n", "<leader>yy", '"+yy')
--- "+p/"+P dropped: OSC52 paste blocks 1-10s waiting for a terminal response
--- most SSH clients never send. Plain p/P already pastes the last yank via
--- the unnamed register, instantly.
-
--------------------- Keymaps --------------------
-vim.keymap.set("n", "i", ":nohls<CR>i", { silent = true })
-vim.keymap.set("n", "<Space>", ":w<CR>", { silent = true })
-
--- Window navigation
-vim.keymap.set("n", "<C-h>", "<C-W>h")
-vim.keymap.set("n", "<C-j>", "<C-W>j")
-vim.keymap.set("n", "<C-k>", "<C-W>k")
-vim.keymap.set("n", "<C-l>", "<C-W>l")
-vim.keymap.set("n", "<C-Left>", "<C-W>h")
-vim.keymap.set("n", "<C-Down>", "<C-W>j")
-vim.keymap.set("n", "<C-Up>", "<C-W>k")
-vim.keymap.set("n", "<C-Right>", "<C-W>l")
-
--- Tab management
-vim.keymap.set("n", "<leader>to", ":tabonly<CR>", { silent = true })
-vim.keymap.set("n", "<leader>o", ":only<CR>", { silent = true })
-vim.keymap.set("n", "<leader><Tab>", ":tabn<CR>", { silent = true })
-vim.keymap.set("n", "<S-Tab>", ":tabp<CR>", { silent = true })
-
-
--------------------- Netrw (built-in file browser) --------------------
-vim.g.netrw_banner = 0
-vim.g.netrw_liststyle = 3
-vim.keymap.set("n", "<F2>", ":Explore<CR>", { silent = true })
-
--------------------- Statusline (built-in) --------------------
-vim.opt.statusline = " %f %m%r%= %y  %l:%c  %p%% "
-
--------------------- Bootstrap lazy.nvim --------------------
-local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
-if vim.fn.isdirectory(lazypath) == 0 then
-    vim.fn.system({
-        "git", "clone", "--filter=blob:none",
-        "https://github.com/folke/lazy.nvim.git",
-        "--branch=stable",
-        lazypath,
-    })
-end
-vim.opt.rtp:prepend(lazypath)
-
-require("lazy").setup({
-    { "4ree/viml-surround", event = "VeryLazy" },
-    { "numToStr/Comment.nvim", event = "VeryLazy", opts = {} },
-    {
-        "junegunn/fzf.vim",
-        dependencies = { "junegunn/fzf" },
-        keys = {
-            { "<leader>f", "<cmd>Files<CR>", desc = "Find files" },
-            { "<leader>b", "<cmd>Buffers<CR>", desc = "Buffers" },
-            { "<leader>r", "<cmd>Rg<CR>", desc = "Ripgrep" },
-            { "<leader>g", "<cmd>GFiles<CR>", desc = "Git files" },
-        },
-    },
-})
-
--------------------- Grep (use ripgrep if available) --------------------
-if vim.fn.executable("rg") == 1 then
-    vim.opt.grepprg = "rg --vimgrep --smart-case"
-    vim.opt.grepformat = "%f:%l:%c:%m"
-end
-
-

nvim/.vimrc

@@ -0,0 +1,142 @@
+syntax on
+set number
+set cursorline
+set expandtab tabstop=4 shiftwidth=4 softtabstop=4
+set autoindent
+set spelllang=vi,en
+
+
+" Fold
+set foldmethod=syntax
+set foldlevel=1
+set foldnestmax=1
+set encoding=utf8
+
+" Search
+set hlsearch
+nnoremap i :nohls<CR>i
+
+" Plugin
+call plug#begin()
+Plug 'neoclide/coc.nvim', {'branch': 'release'}
+Plug 'dense-analysis/ale'
+Plug 'preservim/nerdtree'
+Plug 'preservim/nerdcommenter'
+Plug 'lervag/vimtex'
+Plug 'JuliaEditorSupport/julia-vim'
+Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
+Plug 'junegunn/fzf.vim'
+Plug  'honza/vim-snippets'
+Plug 'vim-airline/vim-airline'
+Plug 'vim-airline/vim-airline-themes'
+Plug 'kevinhwang91/nvim-bqf' 
+Plug 'morhetz/gruvbox'
+Plug 'tpope/vim-fugitive'
+Plug 'ynkdir/vim-diff'
+Plug '4ree/vim-ime'
+call plug#end()
+
+"Color scheme
+"colorscheme iceberg
+"set background=light
+colorscheme gruvbox
+let g:gruvbox_contrast_light = 'hard'
+
+
+
+"Open NERDTree
+:nnoremap <silent> <expr> <F2> g:NERDTree.IsOpen() ? "\:NERDTreeClose<CR>" : bufexists(expand('%')) ? "\:NERDTreeFind<CR>" : "\:NERDTree<CR>"
+
+"Coc.nvim
+inoremap <silent><expr> <TAB>
+      \ coc#pum#visible() ? coc#_select_confirm() :
+      \ coc#expandableOrJumpable() ? "\<C-r>=coc#rpc#request('doKeymap', ['snippets-expand-jump',''])\<CR>" :
+      \ CheckBackSpace() ? "\<TAB>" :
+      \ coc#refresh()
+inoremap <silent><expr> <cr> pumvisible() ? coc#_select_confirm()
+                              \: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
+
+function! CheckBackSpace() abort
+  let col = col('.') - 1
+  return !col || getline('.')[col - 1]  =~# '\s'
+endfunction
+
+let g:coc_snippet_next = '<tab>' 
+inoremap <silent><expr> <CR> coc#pum#visible() ? coc#pum#confirm()
+                              \: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
+
+" Comments
+let mapleader = ","
+
+" remap save
+nnoremap <space> :w<CR>
+
+" moving between windows
+nnoremap <C-h> <C-W>h
+nnoremap <C-j> <C-W>j
+nnoremap <C-k> <C-W>k
+nnoremap <C-l> <C-W>l
+nnoremap <C-Left> <C-W>h
+nnoremap <C-Down> <C-W>j
+nnoremap <C-Up> <C-W>k
+nnoremap <C-Right> <C-W>l
+nnoremap <leader>to :tabonly<CR>
+nnoremap <leader>o :only<CR>
+nnoremap <leader><tab> :tabn<CR>
+nnoremap <S-tab> :tabp<CR>
+
+"set clipboard+=unnamedplus
+" " Copy to clipboard
+vnoremap  <leader>y  "+y
+nnoremap  <leader>Y  "+yg_
+nnoremap  <leader>y  "+y
+nnoremap  <leader>yy  "+yy
+
+" " Paste from clipboard
+nnoremap <leader>p "+p
+nnoremap <leader>P "+P
+
+
+" FZF key mapping
+nnoremap <silent> <Leader>b :Buffers<CR>
+nnoremap <silent> <Leader>r :Rg<CR>
+nnoremap <silent> <Leader>f :Files<CR>
+nnoremap <silent> <Leader>g :GFiles<CR>
+nnoremap <silent> <Leader>w :Rg <C-R><C-W><CR>
+
+filetype plugin on
+set splitright
+set splitbelow
+
+let g:vimtex_view_method= 'zathura'
+
+"Language tool
+map <F3> :ALEToggle<CR>
+
+
+"Use 24-bit (true-color) mode in Vim/Neovim when outside tmux.
+"If you're using tmux version 2.2 or later, you can remove the outermost $TMUX check and use tmux's 24-bit color support
+"(see < http://sunaku.github.io/tmux-24bit-color.html#usage > for more information.)
+if (empty($TMUX))
+  if (has("nvim"))
+    "For Neovim 0.1.3 and 0.1.4 < https://github.com/neovim/neovim/pull/2198 >
+    let $NVIM_TUI_ENABLE_TRUE_COLOR=1
+  endif
+  "For Neovim > 0.1.5 and Vim > patch 7.4.1799 < https://github.com/vim/vim/commit/61be73bb0f965a895bfb064ea3e55476ac175162 >
+  "Based on Vim patch 7.4.1770 (`guicolors` option) < https://github.com/vim/vim/commit/8a633e3427b47286869aa4b96f2bfc1fe65b25cd >
+  " < https://github.com/neovim/neovim/wiki/Following-HEAD#20160511 >
+  if (has("termguicolors"))
+    set termguicolors
+  endif
+endif
+
+if &term =~ 'xterm' || &term == 'win32'
+    " Use DECSCUSR escape sequences
+    let &t_SI = "\e[5 q"    " blink bar
+    let &t_SR = "\e[3 q"    " blink underline
+    let &t_EI = "\e[1 q"    " blink block
+    let &t_ti ..= "\e[1 q"  " blink block
+    let &t_te ..= "\e[0 q"  " default (depends on terminal, normally blink
+    " block)
+endif
+

nvim/coc-settings.json

@@ -0,0 +1,2 @@
+{"coc.preferences.diagnostic.displayByAle":1
+}

nvim/init.lua

@@ -1,240 +0,0 @@
--- Leader key (must be set before lazy.nvim loads)
-vim.g.mapleader = ","
-
--------------------- Options --------------------
-vim.opt.number = true
-vim.opt.cursorline = true
-vim.opt.expandtab = true
-vim.opt.tabstop = 4
-vim.opt.shiftwidth = 4
-vim.opt.softtabstop = 4
-vim.opt.autoindent = true
-vim.opt.spelllang = "vi,en"
-vim.opt.foldmethod = "syntax"
-vim.opt.foldlevel = 1
-vim.opt.foldnestmax = 1
-vim.opt.hlsearch = true
-vim.opt.splitright = true
-vim.opt.splitbelow = true
-vim.opt.termguicolors = true
-vim.opt.autoread = true
-
--------------------- Keymaps --------------------
--- Clear hlsearch then enter insert mode
-vim.keymap.set("n", "i", ":nohls<CR>i", { silent = true })
-
--- Save with space
-vim.keymap.set("n", "<Space>", ":w<CR>", { silent = true })
-
--- Window navigation
-vim.keymap.set("n", "<C-h>", "<C-W>h")
-vim.keymap.set("n", "<C-j>", "<C-W>j")
-vim.keymap.set("n", "<C-k>", "<C-W>k")
-vim.keymap.set("n", "<C-l>", "<C-W>l")
-vim.keymap.set("n", "<C-Left>", "<C-W>h")
-vim.keymap.set("n", "<C-Down>", "<C-W>j")
-vim.keymap.set("n", "<C-Up>", "<C-W>k")
-vim.keymap.set("n", "<C-Right>", "<C-W>l")
-
--- Tab management
-vim.keymap.set("n", "<leader>to", ":tabonly<CR>", { silent = true })
-vim.keymap.set("n", "<leader>o", ":only<CR>", { silent = true })
-vim.keymap.set("n", "<leader><Tab>", ":tabn<CR>", { silent = true })
-vim.keymap.set("n", "<S-Tab>", ":tabp<CR>", { silent = true })
-
--- Clipboard operations
-vim.keymap.set("v", "<leader>y", '"+y')
-vim.keymap.set("n", "<leader>Y", '"+yg_')
-vim.keymap.set("n", "<leader>y", '"+y')
-vim.keymap.set("n", "<leader>yy", '"+yy')
-vim.keymap.set("n", "<leader>p", '"+p')
-vim.keymap.set("n", "<leader>P", '"+P')
-
--- Background toogling
-vim.keymap.set("n", "<leader>bg", function()
-    vim.o.background = vim.o.background == "dark" and "light" or "dark"
-end, { desc = "Toggle light/dark background" })
-
--- Join paragraph
-vim.keymap.set("n", "<leader>j", "vipJ", { desc = "Join paragraph into one line" })
-
--------------------- Bootstrap lazy.nvim --------------------
-local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
-if not vim.uv.fs_stat(lazypath) then
-    vim.fn.system({
-        "git", "clone", "--filter=blob:none",
-        "https://github.com/folke/lazy.nvim.git",
-        "--branch=stable",
-        lazypath,
-    })
-end
-vim.opt.rtp:prepend(lazypath)
-
--------------------- Plugins --------------------
-require("lazy").setup({
-
-    -- Colorscheme
-    {
-        "ellisonleao/gruvbox.nvim",
-        priority = 1000,
-        config = function()
-            require("gruvbox").setup({
-                contrast = "soft",
-            })
-            vim.cmd.colorscheme("gruvbox")
-            vim.o.background = "light"
-        end,
-    },
-
-    -- Icons (dependency for nvim-tree and lualine)
-    { "nvim-tree/nvim-web-devicons", lazy = true },
-
-    -- File tree
-    {
-        "nvim-tree/nvim-tree.lua",
-        dependencies = { "nvim-tree/nvim-web-devicons" },
-        keys = {
-            { "<F2>", "<cmd>NvimTreeToggle<CR>", desc = "Toggle file tree" },
-        },
-        config = function()
-            require("nvim-tree").setup()
-        end,
-    },
-
-    -- Comments
-    {
-        "numToStr/Comment.nvim",
-        event = "VeryLazy",
-        config = function()
-            require("Comment").setup()
-        end,
-    },
-
-    -- Fuzzy finder (fzf-lua with ripgrep)
-    {
-        "ibhagwan/fzf-lua",
-        dependencies = { "nvim-tree/nvim-web-devicons" },
-        keys = {
-            { "<leader>b", "<cmd>FzfLua buffers<CR>", desc = "Buffers" },
-            { "<leader>r", "<cmd>FzfLua live_grep<CR>", desc = "Live grep" },
-            { "<leader>f", "<cmd>FzfLua files<CR>", desc = "Find files" },
-            { "<leader>g", "<cmd>FzfLua git_files<CR>", desc = "Git files" },
-            { "<leader>w", "<cmd>FzfLua grep_cword<CR>", desc = "Grep word under cursor" },
-        },
-        config = function()
-            require("fzf-lua").setup({
-                files = {
-                    cmd = "rg --files --hidden --glob '!**/.git/*'",
-                },
-                grep = {
-                    rg_opts = "--hidden --glob '!**/.git/*' --column --line-number --no-heading --color=always --smart-case",
-                },
-            })
-        end,
-    },
-
-    -- Statusline
-    {
-        "nvim-lualine/lualine.nvim",
-        dependencies = { "nvim-tree/nvim-web-devicons" },
-        config = function()
-            require("lualine").setup({
-                options = { theme = "gruvbox" },
-            })
-        end,
-    },
-
-    -- Autopairs
-    {
-        "windwp/nvim-autopairs",
-        event = "InsertEnter",
-        opts = {},
-    },
-
-    -- Surround
-    { "4ree/viml-surround", event = "VeryLazy" },
-
-    -- LSP
-    {
-        "neovim/nvim-lspconfig",
-        config = function()
-            vim.lsp.config("clangd", {})
-            vim.lsp.config("pyright", {})
-            vim.lsp.config("rust_analyzer", {})
-            vim.lsp.config("julials", {})
-            vim.lsp.enable({ "clangd", "pyright", "rust_analyzer", "julials" })
-
-            vim.api.nvim_create_autocmd("LspAttach", {
-                callback = function(args)
-                    local opts = { buffer = args.buf }
-                    vim.keymap.set("n", "gd", vim.lsp.buf.definition, opts)
-                    vim.keymap.set("n", "gr", vim.lsp.buf.references, opts)
-                    vim.keymap.set("n", "K", vim.lsp.buf.hover, opts)
-                    vim.keymap.set("n", "<leader>rn", vim.lsp.buf.rename, opts)
-                    vim.keymap.set("n", "<leader>ca", vim.lsp.buf.code_action, opts)
-                end,
-            })
-        end,
-    },
-
-    -- Completion (coq_nvim)
-    {
-        "ms-jpq/coq_nvim",
-        branch = "coq",
-        dependencies = {
-            { "ms-jpq/coq.artifacts", branch = "artifacts" },
-            { "ms-jpq/coq.thirdparty", branch = "3p" },
-        },
-        init = function()
-            vim.g.coq_settings = { auto_start = "shut-up" }
-        end,
-    },
-
-    -- Quickfix enhancements
-    { "kevinhwang91/nvim-bqf", ft = "qf" },
-
-    -- Git
-    { "tpope/vim-fugitive" },
-
-    -- IME support
-    {
-        "4ree/vim-ime",
-        event = "VeryLazy",
-        opts = {},
-    },
-
-    -- LaTeX
-    {
-        "lervag/vimtex",
-        config = function()
-            vim.g.vimtex_view_method = "zathura"
-            vim.g.vimtex_compiler_latexmk = {
-                options = {
-                    "-verbose",
-                    "-file-line-error",
-                    "-synctex=1",
-                    "-interaction=nonstopmode",
-                    "-shell-escape",
-                    "-output-directory=./output",
-                    "-aux-directory=./",
-                },
-            }
-        end,
-    },
-
-    -- Julia
-    { "JuliaEditorSupport/julia-vim" },
-    {
-        dir = "/home/nnduc/git/vim-uk",
-        event = "VeryLazy",
-        build = "cmake -S . -B build -DCMAKE_BUILD_TYPE=Release && cmake --build build -j",
-        opts = {
-            input_method = "vni",
-            toggle_key   = "<leader>v",
-        },
-        config = function(_, opts)
-            require("uknvim").setup(opts)
-        end,
-    },
-
-})

nvim/init.vim

@@ -0,0 +1,132 @@
+syntax on
+set number
+set cursorline
+set expandtab tabstop=4 shiftwidth=4 softtabstop=4
+set autoindent
+set spelllang=vi,en
+
+
+" Fold
+set foldmethod=syntax
+set foldlevel=1
+set foldnestmax=1
+set encoding=utf8
+
+" Search
+set hlsearch
+nnoremap i :nohls<CR>i
+
+" Plugin
+call plug#begin()
+Plug 'neoclide/coc.nvim', {'branch': 'release'}
+Plug 'dense-analysis/ale'
+Plug 'preservim/nerdtree'
+Plug 'preservim/nerdcommenter'
+Plug 'lervag/vimtex'
+Plug 'JuliaEditorSupport/julia-vim'
+Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
+Plug 'junegunn/fzf.vim'
+Plug  'honza/vim-snippets'
+Plug 'vim-airline/vim-airline'
+Plug 'vim-airline/vim-airline-themes'
+Plug 'kevinhwang91/nvim-bqf' 
+Plug 'morhetz/gruvbox'
+Plug 'tpope/vim-fugitive'
+Plug 'ynkdir/vim-diff'
+Plug '4ree/vim-ime'
+call plug#end()
+
+"Color scheme
+"colorscheme iceberg
+"set background=light
+colorscheme gruvbox
+let g:gruvbox_contrast_light = 'hard'
+
+
+
+"Open NERDTree
+ map <F2> :NERDTreeToggle<CR>
+
+
+"Coc.nvim
+inoremap <silent><expr> <TAB>
+      \ coc#pum#visible() ? coc#_select_confirm() :
+      \ coc#expandableOrJumpable() ? "\<C-r>=coc#rpc#request('doKeymap', ['snippets-expand-jump',''])\<CR>" :
+      \ CheckBackSpace() ? "\<TAB>" :
+      \ coc#refresh()
+inoremap <silent><expr> <cr> pumvisible() ? coc#_select_confirm()
+                              \: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
+
+function! CheckBackSpace() abort
+  let col = col('.') - 1
+  return !col || getline('.')[col - 1]  =~# '\s'
+endfunction
+
+let g:coc_snippet_next = '<tab>' 
+inoremap <silent><expr> <CR> coc#pum#visible() ? coc#pum#confirm()
+                              \: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
+
+" Comments
+let mapleader = ","
+
+" remap save
+nnoremap <space> :w<CR>
+
+" moving between windows
+nnoremap <C-h> <C-W>h
+nnoremap <C-j> <C-W>j
+nnoremap <C-k> <C-W>k
+nnoremap <C-l> <C-W>l
+nnoremap <C-Left> <C-W>h
+nnoremap <C-Down> <C-W>j
+nnoremap <C-Up> <C-W>k
+nnoremap <C-Right> <C-W>l
+nnoremap <leader>to :tabonly<CR>
+nnoremap <leader>o :only<CR>
+nnoremap <leader><tab> :tabn<CR>
+nnoremap <S-tab> :tabp<CR>
+
+"set clipboard+=unnamedplus
+" " Copy to clipboard
+vnoremap  <leader>y  "+y
+nnoremap  <leader>Y  "+yg_
+nnoremap  <leader>y  "+y
+nnoremap  <leader>yy  "+yy
+
+" " Paste from clipboard
+nnoremap <leader>p "+p
+nnoremap <leader>P "+P
+
+
+" FZF key mapping
+nnoremap <silent> <Leader>b :Buffers<CR>
+nnoremap <silent> <Leader>r :Rg<CR>
+nnoremap <silent> <Leader>f :Files<CR>
+nnoremap <silent> <Leader>g :GFiles<CR>
+nnoremap <silent> <Leader>w :Rg <C-R><C-W><CR>
+
+filetype plugin on
+set splitright
+set splitbelow
+
+let g:vimtex_view_method= 'zathura'
+
+"Language tool
+map <F3> :ALEToggle<CR>
+
+
+"Use 24-bit (true-color) mode in Vim/Neovim when outside tmux.
+"If you're using tmux version 2.2 or later, you can remove the outermost $TMUX check and use tmux's 24-bit color support
+"(see < http://sunaku.github.io/tmux-24bit-color.html#usage > for more information.)
+if (empty($TMUX))
+  if (has("nvim"))
+    "For Neovim 0.1.3 and 0.1.4 < https://github.com/neovim/neovim/pull/2198 >
+    let $NVIM_TUI_ENABLE_TRUE_COLOR=1
+  endif
+  "For Neovim > 0.1.5 and Vim > patch 7.4.1799 < https://github.com/vim/vim/commit/61be73bb0f965a895bfb064ea3e55476ac175162 >
+  "Based on Vim patch 7.4.1770 (`guicolors` option) < https://github.com/vim/vim/commit/8a633e3427b47286869aa4b96f2bfc1fe65b25cd >
+  " < https://github.com/neovim/neovim/wiki/Following-HEAD#20160511 >
+  if (has("termguicolors"))
+    set termguicolors
+  endif
+endif

nvim/init.vim(server)

@@ -0,0 +1,127 @@
+syntax on
+set number
+set cursorline
+set expandtab tabstop=4 shiftwidth=4 softtabstop=4
+set autoindent
+set spelllang=vi,en
+
+" Fold
+set foldmethod=syntax
+set foldlevel=1
+set foldnestmax=1
+set encoding=utf8
+
+" Search
+set hlsearch
+nnoremap i :nohls<CR>i
+
+" Plugin
+call plug#begin()
+Plug 'neoclide/coc.nvim', {'branch': 'release'}
+Plug 'preservim/nerdtree'
+Plug 'preservim/nerdcommenter'
+Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
+Plug 'junegunn/fzf.vim'
+Plug 'vim-airline/vim-airline'
+Plug 'vim-airline/vim-airline-themes'
+Plug 'kevinhwang91/nvim-bqf' 
+Plug 'morhetz/gruvbox'
+Plug 'tpope/vim-fugitive'
+Plug 'ynkdir/vim-diff'
+call plug#end()
+
+"Color scheme
+
+colorscheme gruvbox
+let g:gruvbox_contrast_light = 'hard'
+
+set background=dark
+
+" Comments
+let mapleader = ","
+
+"Open NERDTree
+:nnoremap <silent> <expr> <F2> g:NERDTree.IsOpen() ? "\:NERDTreeClose<CR>" : bufexists(expand('%')) ? "\:NERDTreeFind<CR>" : "\:NERDTree<CR>"
+
+
+"Coc.nvim
+inoremap <silent><expr> <TAB>
+      \ coc#pum#visible() ? coc#_select_confirm() :
+      \ coc#expandableOrJumpable() ? "\<C-r>=coc#rpc#request('doKeymap', ['snippets-expand-jump',''])\<CR>" :
+      \ CheckBackSpace() ? "\<TAB>" :
+      \ coc#refresh()
+
+inoremap <silent><expr> <CR> coc#pum#visible() ? coc#_select_confirm() : coc#refresh()
+
+function! CheckBackSpace() abort
+  let col = col('.') - 1
+  return !col || getline('.')[col - 1]  =~# '\s'
+endfunction
+
+let g:coc_snippet_next = '<tab>'
+" remap save
+nnoremap <space> :w<CR>
+
+" moving between windows
+nnoremap <C-h> <C-W>h
+nnoremap <C-j> <C-W>j
+nnoremap <C-k> <C-W>k
+nnoremap <C-l> <C-W>l
+nnoremap <C-Left> <C-W>h
+nnoremap <C-Down> <C-W>j
+nnoremap <C-Up> <C-W>k
+nnoremap <C-Right> <C-W>l
+nnoremap <leader>to :tabonly<CR>
+nnoremap <leader>o :only<CR>
+nnoremap <leader><tab> :tabn<CR>
+nnoremap <S-tab> :tabp<CR>
+
+"set clipboard+=unnamedplus
+" " Copy to clipboard
+vnoremap  <leader>y  "+y
+nnoremap  <leader>Y  "+yg_
+nnoremap  <leader>y  "+y
+nnoremap  <leader>yy  "+yy
+
+" " Paste from clipboard
+nnoremap <leader>p "+p
+nnoremap <leader>P "+P
+
+
+" FZF key mapping
+nnoremap <silent> <Leader>b :Buffers<CR>
+nnoremap <silent> <Leader>r :Rg<CR>
+nnoremap <silent> <Leader>f :Files<CR>
+nnoremap <silent> <Leader>g :GFiles<CR>
+nnoremap <silent> <Leader>w :Rg <C-R><C-W><CR>
+
+filetype plugin on
+set splitright
+set splitbelow
+
+"Use 24-bit (true-color) mode in Vim/Neovim when outside tmux.
+"If you're using tmux version 2.2 or later, you can remove the outermost $TMUX check and use tmux's 24-bit color support
+"(see < http://sunaku.github.io/tmux-24bit-color.html#usage > for more information.)
+if (empty($TMUX))
+  if (has("nvim"))
+    "For Neovim 0.1.3 and 0.1.4 < https://github.com/neovim/neovim/pull/2198 >
+    let $NVIM_TUI_ENABLE_TRUE_COLOR=1
+  endif
+  "For Neovim > 0.1.5 and Vim > patch 7.4.1799 < https://github.com/vim/vim/commit/61be73bb0f965a895bfb064ea3e55476ac175162 >
+  "Based on Vim patch 7.4.1770 (`guicolors` option) < https://github.com/vim/vim/commit/8a633e3427b47286869aa4b96f2bfc1fe65b25cd >
+  " < https://github.com/neovim/neovim/wiki/Following-HEAD#20160511 >
+  if (has("termguicolors"))
+    set termguicolors
+  endif
+endif
+
+if &term =~ 'xterm' || &term == 'win32'
+    " Use DECSCUSR escape sequences
+    let &t_SI = "\e[5 q"    " blink bar
+    let &t_SR = "\e[3 q"    " blink underline
+    let &t_EI = "\e[1 q"    " blink block
+    let &t_ti ..= "\e[1 q"  " blink block
+    let &t_te ..= "\e[0 q"  " default (depends on terminal, normally blink
+    " block)
+endif
+

nvim/latexmk.vim

@@ -0,0 +1,227 @@
+" VimTeX - LaTeX plugin for Vim
+"
+" Maintainer: Karl Yngve Lervåg
+" Email:      karl.yngve@gmail.com
+"
+
+function! vimtex#compiler#latexmk#init(options) abort " {{{1
+  return s:compiler.new(a:options)
+endfunction
+
+" }}}1
+
+function! vimtex#compiler#latexmk#get_rc_opt(root, opt, type, default) abort " {{{1
+  "
+  " Parse option from .latexmkrc.
+  "
+  " Arguments:
+  "   root         Root of LaTeX project
+  "   opt          Name of options
+  "   type         0 if string, 1 if integer, 2 if list
+  "   default      Value to return if option not found in latexmkrc file
+  "
+  " Output:
+  "   [value, location]
+  "
+  "   value        Option value (integer or string)
+  "   location     An integer that indicates where option was found
+  "                 -1: not found (default value returned)
+  "                  0: global latexmkrc file
+  "                  1: local latexmkrc file
+  "
+
+  if a:type == 0
+    let l:pattern = '^\s*\$' . a:opt . '\s*=\s*[''"]\(.\+\)[''"]'
+  elseif a:type == 1
+    let l:pattern = '^\s*\$' . a:opt . '\s*=\s*\(\d\+\)'
+  elseif a:type == 2
+    let l:pattern = '^\s*@' . a:opt . '\s*=\s*(\(.*\))'
+  else
+    throw 'VimTeX: Argument error'
+  endif
+
+  " Candidate files
+  " - each element is a pair [path_to_file, is_local_rc_file].
+  let l:files = [
+        \ [a:root . '/latexmkrc', 1],
+        \ [a:root . '/.latexmkrc', 1],
+        \ [fnamemodify('~/.latexmkrc', ':p'), 0],
+        \ [fnamemodify(
+        \    !empty($XDG_CONFIG_HOME) ? $XDG_CONFIG_HOME : '~/.config', ':p')
+        \    . '/latexmk/latexmkrc', 0]
+        \]
+
+  let l:result = [a:default, -1]
+
+  for [l:file, l:is_local] in l:files
+    if filereadable(l:file)
+      let l:match = matchlist(readfile(l:file), l:pattern)
+      if len(l:match) > 1
+        let l:result = [l:match[1], l:is_local]
+        break
+      end
+    endif
+  endfor
+
+  " Parse the list
+  if a:type == 2 && l:result[1] > -1
+    let l:array = split(l:result[0], ',')
+    let l:result[0] = []
+    for l:x in l:array
+      let l:x = substitute(l:x, "^'", '', '')
+      let l:x = substitute(l:x, "'$", '', '')
+      let l:result[0] += [l:x]
+    endfor
+  endif
+
+  return l:result
+endfunction
+
+" }}}1
+
+
+let s:compiler = vimtex#compiler#_template#new({
+      \ 'name' : 'latexmk',
+      \ 'callback' : 1,
+      \ 'continuous': 1,
+      \ 'executable' : 'latexmk',
+      \ 'options' : [
+      \   '-verbose',
+      \   '-file-line-error',
+      \   '-synctex=1',
+      \   '-interaction=nonstopmode',
+      \   '-shell-escape',
+      \   '-output-directory=./output',
+      \   '-aux-directory=./',
+      \ ],
+      \})
+
+function! s:compiler.__check_requirements() abort dict " {{{1
+  if !executable(self.executable)
+    call vimtex#log#warning(self.executable . ' is not executable')
+    throw 'VimTeX: Requirements not met'
+  endif
+endfunction
+
+" }}}1
+function! s:compiler.__init() abort dict " {{{1
+  " Check if .latexmkrc sets the build_dir - if so this should be respected
+  let l:out_dir =
+        \ vimtex#compiler#latexmk#get_rc_opt(self.state.root, 'out_dir', 0, '')[0]
+  if !empty(l:out_dir)
+    if !empty(self.build_dir) && (self.build_dir !=# l:out_dir)
+      call vimtex#log#warning(
+            \ 'Setting out_dir from latexmkrc overrides build_dir!',
+            \ 'Changed build_dir from: ' . self.build_dir,
+            \ 'Changed build_dir to: ' . l:out_dir)
+    endif
+    let self.build_dir = l:out_dir
+  endif
+endfunction
+
+" }}}1
+function! s:compiler.__build_cmd() abort dict " {{{1
+  let l:cmd = (has('win32')
+        \ ? 'set max_print_line=2000 & '
+        \ : 'max_print_line=2000 ') . self.executable
+
+  let l:cmd .= ' ' . join(self.options)
+  let l:cmd .= ' ' . self.get_engine()
+
+  if !empty(self.build_dir)
+    let l:cmd .= ' -outdir=' . fnameescape(self.build_dir)
+  endif
+
+  if self.continuous
+    let l:cmd .= ' -pvc -view=none'
+
+    if self.callback
+      for [l:opt, l:val] in [
+            \ ['compiling_cmd', 'vimtex_compiler_callback_compiling'],
+            \ ['success_cmd', 'vimtex_compiler_callback_success'],
+            \ ['failure_cmd', 'vimtex_compiler_callback_failure'],
+            \]
+        let l:cmd .= s:wrap_option_appendcmd(l:opt, 'echo ' . l:val)
+      endfor
+    endif
+  endif
+
+  return l:cmd . ' ' . vimtex#util#shellescape(self.state.base)
+endfunction
+
+" }}}1
+function! s:compiler.__pprint_append() abort dict " {{{1
+  return [
+        \ ['callback', self.callback],
+        \ ['continuous', self.continuous],
+        \ ['executable', self.executable],
+        \]
+endfunction
+
+" }}}1
+
+function! s:compiler.clean(full) abort dict " {{{1
+  let l:cmd = self.executable . ' ' . (a:full ? '-C ' : '-c ')
+  if !empty(self.build_dir)
+    let l:cmd .= printf(' -outdir=%s ', fnameescape(self.build_dir))
+  endif
+  let l:cmd .= vimtex#util#shellescape(self.state.base)
+
+  call vimtex#jobs#run(l:cmd, {'cwd': self.state.root})
+endfunction
+
+" }}}1
+function! s:compiler.get_engine() abort dict " {{{1
+  " Parse tex_program from TeX directive
+  let l:tex_program_directive = self.state.get_tex_program()
+  let l:tex_program = l:tex_program_directive
+
+
+  " Parse tex_program from from pdf_mode option in .latexmkrc
+  let [l:pdf_mode, l:is_local] =
+        \ vimtex#compiler#latexmk#get_rc_opt(self.state.root, 'pdf_mode', 1, -1)
+
+  if l:pdf_mode >= 1 && l:pdf_mode <= 5
+    let l:tex_program_pdfmode = [
+          \ 'pdflatex',
+          \ 'pdfps',
+          \ 'pdfdvi',
+          \ 'lualatex',
+          \ 'xelatex',
+          \][l:pdf_mode-1]
+
+    " Use pdf_mode if there is no TeX directive
+    if l:tex_program_directive ==# '_'
+      let l:tex_program = l:tex_program_pdfmode
+    elseif l:is_local && l:tex_program_directive !=# l:tex_program_pdfmode
+      " Give warning when there may be a confusing conflict
+      call vimtex#log#warning(
+            \ 'Value of pdf_mode from latexmkrc is inconsistent with ' .
+            \ 'TeX program directive!',
+            \ 'TeX program: ' . l:tex_program_directive,
+            \ 'pdf_mode:    ' . l:tex_program_pdfmode,
+            \ 'The value of pdf_mode will be ignored.')
+    endif
+  endif
+
+  return get(g:vimtex_compiler_latexmk_engines,
+        \ l:tex_program,
+        \ g:vimtex_compiler_latexmk_engines._)
+endfunction
+
+" }}}1
+
+
+function! s:wrap_option_appendcmd(name, value) abort " {{{1
+  " Note: On Linux, we use double quoted perl strings; these interpolate
+  "       variables. One should therefore NOT pass values that contain `$`.
+  let l:win_cmd_sep = has('nvim') ? '^&' : '&'
+  let l:common = printf('$%s = ($%s ? $%s', a:name, a:name, a:name)
+  return has('win32')
+        \ ? printf(' -e "%s . '' %s '' : '''') . ''%s''"',
+        \          l:common, l:win_cmd_sep, a:value)
+        \ : printf(' -e ''%s . " ; " : "") . "%s"''',
+        \          l:common, a:value)
+endfunction
+
+"}}}1

nvim/lazy-lock.json

@@ -1,20 +0,0 @@
-{
-  "Comment.nvim": { "branch": "master", "commit": "e30b7f2008e52442154b66f7c519bfd2f1e32acb" },
-  "coq.artifacts": { "branch": "artifacts", "commit": "d545035d06408f2d68cd03bc401425e42c298fc4" },
-  "coq.thirdparty": { "branch": "3p", "commit": "a021e24f1ff538d339aece0de80d621b68862701" },
-  "coq_nvim": { "branch": "coq", "commit": "0cdbf99893729c5ffa74064382efc53364d7045d" },
-  "fzf-lua": { "branch": "main", "commit": "78b85d2a522b1e6a2d154216b3e532a1df1ad6d7" },
-  "gruvbox.nvim": { "branch": "main", "commit": "154eb5ff5b96d0641307113fa385eaf0d36d9796" },
-  "julia-vim": { "branch": "master", "commit": "52b30547346b21bc93acda28d626795667f9e087" },
-  "lazy.nvim": { "branch": "main", "commit": "306a05526ada86a7b30af95c5cc81ffba93fef97" },
-  "lualine.nvim": { "branch": "master", "commit": "221ce6b2d999187044529f49da6554a92f740a96" },
-  "nvim-autopairs": { "branch": "master", "commit": "430522f95fe4fb7c511ec64f8c1a90cc6a66c05c" },
-  "nvim-bqf": { "branch": "main", "commit": "c282a62bec6c0621a1ef5132aa3f4c9fc4dcc2c7" },
-  "nvim-lspconfig": { "branch": "master", "commit": "a9bb4d5f4276aa5cddc015faa3ecc5a7b5a26b14" },
-  "nvim-tree.lua": { "branch": "master", "commit": "478c69c0fe253caea88de9c5e138bfa77395a59a" },
-  "nvim-web-devicons": { "branch": "master", "commit": "58447c1fca354bbf184425e4a8d01deecbd6f3c4" },
-  "vim-fugitive": { "branch": "master", "commit": "3b753cf8c6a4dcde6edee8827d464ba9b8c4a6f0" },
-  "vim-ime": { "branch": "master", "commit": "79e3b02eb50a57305113550be7ca163b267b5e30" },
-  "viml-surround": { "branch": "master", "commit": "98358bad347aa2b8a180c2edde84c3bd8a51fdd1" },
-  "vimtex": { "branch": "master", "commit": "16a5609d17a436db7f48046d91747fd6a9d75c74" }
-}

pipewire/minimal.conf

@@ -0,0 +1,476 @@
+# Simple daemon config file for PipeWire version "1.2.3" #
+#
+# Copy and edit this file in /etc/pipewire for system-wide changes
+# or in ~/.config/pipewire for local changes.
+#
+# It is also possible to place a file with an updated section in
+# /etc/pipewire/minimal.conf.d/ for system-wide changes or in
+# ~/.config/pipewire/minimal.conf.d/ for local changes.
+#
+
+context.properties = {
+    ## Configure properties in the system.
+    #library.name.system                   = support/libspa-support
+    #context.data-loop.library.name.system = support/libspa-support
+    #support.dbus                          = true
+    #link.max-buffers                      = 64
+    link.max-buffers                       = 16                       # version < 3 clients can't handle more
+    #mem.warn-mlock                        = false
+    #mem.allow-mlock                       = true
+    #mem.mlock-all                         = false
+    #clock.power-of-two-quantum            = true
+    #log.level                             = 2
+    #cpu.zero.denormals                    = false
+
+    core.daemon = true              # listening for socket connections
+    core.name   = pipewire-0        # core name and socket name
+
+    ## Properties for the DSP configuration.
+    #default.clock.rate          = 48000
+    #default.clock.allowed-rates = [ 48000 ]
+    #default.clock.quantum       = 1024
+    #default.clock.min-quantum   = 32
+    #default.clock.max-quantum   = 2048
+    #default.clock.quantum-limit = 8192
+    #default.clock.quantum-floor = 4
+    #default.video.width         = 640
+    #default.video.height        = 480
+    #default.video.rate.num      = 25
+    #default.video.rate.denom    = 1
+    #
+    settings.check-quantum      = true
+    settings.check-rate         = true
+
+    # This config can use udev or hardcoded ALSA devices. Make sure to
+    # change the alsa device below when disabling udev
+    minimal.use-udev = true
+
+    # Load the pulseaudio emulation daemon
+    minimal.use-pulse = true
+}
+
+context.properties.rules = [
+    {   matches = [ { cpu.vm.name = !null } ]
+        actions = {
+            update-props = {
+                # These overrides are only applied when running in a vm.
+                default.clock.min-quantum = 1024
+	    }
+        }
+    }
+]
+
+context.spa-libs = {
+    #<factory-name regex> = <library-name>
+    #
+    # Used to find spa factory names. It maps an spa factory name
+    # regular expression to a library name that should contain
+    # that factory.
+    #
+    audio.convert.* = audioconvert/libspa-audioconvert
+    audio.adapt     = audioconvert/libspa-audioconvert
+    api.alsa.*      = alsa/libspa-alsa
+    support.*       = support/libspa-support
+}
+
+context.modules = [
+    #{ name = <module-name>
+    #    ( args  = { <key> = <value> ... } )
+    #    ( flags = [ ( ifexists ) ( nofail ) ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Loads a module with the given parameters.
+    # If ifexists is given, the module is ignored when it is not found.
+    # If nofail is given, module initialization failures are ignored.
+    #
+
+    # Uses realtime scheduling to boost the audio thread priorities. This uses
+    # RTKit if the user doesn't have permission to use regular realtime
+    # scheduling.
+    { name = libpipewire-module-rt
+        args = {
+            nice.level   = -11
+            rt.prio      = 88
+            #rt.time.soft = -1
+            #rt.time.hard = -1
+        }
+        flags = [ ifexists nofail ]
+    }
+
+    # The native communication protocol.
+    { name = libpipewire-module-protocol-native }
+
+    # The profile module. Allows application to access profiler
+    # and performance data. It provides an interface that is used
+    # by pw-top and pw-profiler.
+    { name = libpipewire-module-profiler }
+
+    # Allows applications to create metadata objects. It creates
+    # a factory for Metadata objects.
+    { name = libpipewire-module-metadata }
+
+    # Creates a factory for making nodes that run in the
+    # context of the PipeWire server.
+    { name = libpipewire-module-spa-node-factory }
+
+    { name = libpipewire-module-spa-device-factory }
+
+    # Allows creating nodes that run in the context of the
+    # client. Is used by all clients that want to provide
+    # data to PipeWire.
+    { name = libpipewire-module-client-node }
+
+    # The access module can perform access checks and block
+    # new clients.
+    { name = libpipewire-module-access
+        args = {
+            # access.allowed to list an array of paths of allowed
+            # apps.
+            #access.allowed = [
+            #    /usr/bin/pipewire-media-session
+            #]
+
+            # An array of rejected paths.
+            #access.rejected = [ ]
+
+            # An array of paths with restricted access.
+            #access.restricted = [ ]
+
+            # Anything not in the above lists gets assigned the
+            # access.force permission.
+            #access.force = flatpak
+        }
+    }
+
+    # Makes a factory for wrapping nodes in an adapter with a
+    # converter and resampler.
+    { name = libpipewire-module-adapter }
+
+    # Makes a factory for creating links between ports.
+    { name = libpipewire-module-link-factory }
+
+    { name = libpipewire-module-protocol-pulse
+      condition = [ { minimal.use-pulse = true } ]
+    }
+]
+
+pulse.properties = {
+    # the addresses this server listens on
+    server.address = [
+        "unix:native"
+    ]
+}
+
+stream.properties = {
+    adapter.auto-port-config = { mode = dsp }
+}
+
+context.objects = [
+    #{ factory = <factory-name>
+    #    ( args  = { <key> = <value> ... } )
+    #    ( flags = [ ( nofail ) ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Creates an object from a PipeWire factory with the given parameters.
+    # If nofail is given, errors are ignored (and no object is created).
+    #
+    #{ factory = spa-node-factory   args = { factory.name = videotestsrc node.name = videotestsrc node.description = videotestsrc "Spa:Pod:Object:Param:Props:patternType" = 1 } }
+    #{ factory = spa-device-factory args = { factory.name = api.jack.device foo=bar } flags = [ nofail ] }
+    #{ factory = spa-device-factory args = { factory.name = api.alsa.enum.udev } }
+    #{ factory = spa-node-factory   args = { factory.name = api.alsa.seq.bridge node.name = Internal-MIDI-Bridge } }
+    #{ factory = adapter            args = { factory.name = audiotestsrc node.name = my-test node.description = audiotestsrc } }
+    #{ factory = spa-node-factory   args = { factory.name = api.vulkan.compute.source node.name = my-compute-source } }
+
+    # Make a default metadata store
+    { factory = metadata
+        args = {
+            metadata.name = default
+    #       metadata.values = [
+    #            { key = default.audio.sink   value = { name = somesink } }
+    #            { key = default.audio.source value = { name = somesource } }
+    #        ]
+        }
+    }
+
+    # A default dummy driver. This handles nodes marked with the "node.always-process"
+    # property when no other driver is currently active. JACK clients need this.
+    { factory = spa-node-factory
+        args = {
+            factory.name    = support.node.driver
+            node.name       = Dummy-Driver
+            node.group      = pipewire.dummy
+            priority.driver = 20000
+        }
+    }
+    { factory = spa-node-factory
+        args = {
+            factory.name    = support.node.driver
+            node.name       = Freewheel-Driver
+            priority.driver = 19000
+            node.group      = pipewire.freewheel
+            node.freewheel  = true
+            #freewheel.wait = 10
+        }
+    }
+
+    # This creates a ALSA udev device that will enumerate all
+    # ALSA devices. Because it is using ACP and has the auto-profile
+    # property set, this will enable a profile and create associated
+    # nodes, which will be automatically configured to their best
+    # configuration with the auto-port-config settings.
+    # Extra node and device params can be given with node.param and
+    # device.param prefixes.
+    { factory = spa-device-factory
+        args = {
+            factory.name           = api.alsa.enum.udev
+            alsa.use-acp = true
+            device.object.properties = {
+                api.acp.auto-profile = true
+                api.acp.auto-port = true
+                device.object.properties = {
+                    node.adapter             = audio.adapt
+                    resample.disable         = false
+                    adapter.auto-port-config = {
+                        mode = dsp
+                        monitor = false
+                        control = false
+                        position = preserve   # unknown, aux
+                    }
+                    #node.param.Props    = {
+                    #    channelVolumes = [ 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 ]
+                    #}
+                }
+                #device.param.Profile    = {
+                #    #idx = 0
+                #    name = pro-audio
+                #}
+            }
+        }
+        condition = [ { minimal.use-udev = true } ]
+    }
+
+    # This creates a single PCM source device for the given
+    # alsa device path hw:0. You can change source to sink
+    # to make a sink in the same way.
+    { factory = adapter
+        args = {
+            factory.name           = api.alsa.pcm.source
+            node.name              = "system"
+            node.description       = "system"
+            media.class            = "Audio/Source"
+            api.alsa.path          = "hw:4"
+            #api.alsa.period-size   = 0
+            #api.alsa.period-num    = 0
+            #api.alsa.headroom      = 0
+            #api.alsa.start-delay   = 0
+            #api.alsa.disable-mmap  = false
+            #api.alsa.disable-batch = false
+	    #api.alsa.use-chmap     = false
+	    #api.alsa.multirate     = true
+	    #latency.internal.rate  = 0
+	    #latency.internal.ns    = 0
+	    #clock.name             = api.alsa.0
+            node.suspend-on-idle   = false
+            #audio.format           = "S32"
+            #audio.rate             = 48000
+            #audio.allowed-rates    = [ ]
+            #audio.channels         = 4
+            #audio.position         = [ FL FR RL RR ]
+            #resample.quality       = 4
+            resample.disable       = true
+            #monitor.channel-volumes = false
+            #channelmix.normalize   = false
+            #channelmix.mix-lfe     = true
+            #channelmix.upmix       = true
+            #channelmix.upmix-method = psd  # none, simple
+            #channelmix.lfe-cutoff  = 150
+            #channelmix.fc-cutoff   = 12000
+            #channelmix.rear-delay  = 12.0
+            #channelmix.stereo-widen = 0.0
+            #channelmix.hilbert-taps = 0
+            #channelmix.disable     = false
+            #dither.noise = 0
+            #node.param.Props      = {
+            #    params = [
+            #        audio.channels 6
+            #    ]
+            #}
+            adapter.auto-port-config = {
+                mode = dsp
+                monitor = false
+                control = false
+                position = unknown   # aux, preserve
+            }
+            #node.param.PortConfig    = {
+            #    direction = Output
+            #    mode = dsp
+            #    format = {
+            #        mediaType = audio
+            #        mediaSubtype = raw
+            #        format = F32
+            #        rate = 48000
+            #        channels = 4
+            #        position = [ FL FR RL RR ]
+            #    }
+            #}
+            #node.param.Props    = {
+            #    channelVolumes = [ 0.5 0.4 0.3 0.5 ]
+            #}
+        }
+        condition = [ { minimal.use-udev = false } ]
+    }
+    { factory = adapter
+        args = {
+            factory.name           = api.alsa.pcm.sink
+            node.name              = "system"
+            node.description       = "system"
+            media.class            = "Audio/Sink"
+            api.alsa.path          = "hw:4"
+            #api.alsa.period-size   = 0
+            #api.alsa.period-num    = 0
+            #api.alsa.headroom      = 0
+            #api.alsa.start-delay   = 0
+            #api.alsa.disable-mmap  = false
+            #api.alsa.disable-batch = false
+            #api.alsa.use-chmap     = false
+            #api.alsa.multirate     = true
+            #latency.internal.rate  = 0
+            #latency.internal.ns    = 0
+            #clock.name             = api.alsa.0
+            node.suspend-on-idle     = false
+            #audio.format           = "S32"
+            #audio.rate             = 48000
+            #audio.allowed-rates    = [ ]
+            #audio.channels         = 2
+            #audio.position         = "FL,FR"
+            #resample.quality      = 4
+            resample.disable      = true
+            #channelmix.normalize  = false
+            #channelmix.mix-lfe    = true
+            #channelmix.upmix      = true
+            #channelmix.upmix-method = psd  # none, simple
+            #channelmix.lfe-cutoff = 150
+            #channelmix.fc-cutoff  = 12000
+            #channelmix.rear-delay = 12.0
+            #channelmix.stereo-widen = 0.0
+            #channelmix.hilbert-taps = 0
+            #channelmix.disable     = false
+            #dither.noise = 0
+            #node.param.Props      = {
+            #    params = [
+            #        audio.format  S16
+            #    ]
+            #}
+            adapter.auto-port-config = {
+                mode = dsp
+                monitor = false
+                control = false
+                position = unknown   # aux, preserve
+            }
+            #node.param.PortConfig    = {
+            #    direction = Input
+            #    mode = dsp
+            #    monitor = true
+            #    format = {
+            #        mediaType = audio
+            #        mediaSubtype = raw
+            #        format = F32
+            #        rate = 48000
+            #        channels = 4
+            #    }
+            #}
+            #node.param.Props    = {
+            #    channelVolumes = [ 0.5 0.4 0.3 0.5 ]
+            #}
+        }
+        condition = [ { minimal.use-udev = false } ]
+    }
+    # This creates a new Source node. It will have input ports
+    # that you can link, to provide audio for this source.
+    #{ factory = adapter
+    #    args = {
+    #        factory.name     = support.null-audio-sink
+    #        node.name        = "my-mic"
+    #        node.description = "Microphone"
+    #        media.class      = "Audio/Source/Virtual"
+    #        audio.position   = "FL,FR"
+    #        monitor.passthrough = true
+    #        adapter.auto-port-config = {
+    #            mode = dsp
+    #            monitor = true
+    #            position = preserve   # unknown, aux, preserve
+    #        }
+    #    }
+    #}
+    # This creates a new link between the source and the virtual
+    # source ports.
+    #{ factory = link-factory
+    #    args = {
+    #        link.output.node = system
+    #        link.output.port = capture_1
+    #        link.input.node  = my-mic
+    #        link.input.port  = input_FL
+    #    }
+    #}
+    #{ factory = link-factory
+    #    args = {
+    #        link.output.node = system
+    #        link.output.port = capture_2
+    #        link.input.node  = my-mic
+    #        link.input.port  = input_FR
+    #    }
+    #}
+]
+
+context.exec = [
+    #{   path = <program-name>
+    #    ( args = "<arguments>" | [ <arg1> <arg2> ... ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Execute the given program with arguments.
+    #
+    # You can optionally start the pulseaudio-server here as well
+    # but it is better to start it as a systemd service.
+    # It can be interesting to start another daemon here that listens
+    # on another address with the -a option (eg. -a tcp:4713).
+    #
+    ##{ path = "/usr/bin/pipewire" args = "-c pipewire-pulse.conf" }
+]
+
+node.rules = [
+    {   matches = [
+            {
+                # all keys must match the value. ! negates. ~ starts regex.
+                #alsa.card_name = "ICUSBAUDIO7D"
+                #api.alsa.pcm.stream = "playback"
+            }
+        ]
+        actions = {
+            update-props = {
+                #node.name = "alsa_playback.ICUSBAUDIO7D"
+            }
+        }
+    }
+]
+device.rules = [
+    {   matches = [
+            {
+                #alsa.card_name = "ICUSBAUDIO7D"
+            }
+        ]
+        actions = {
+            update-props = {
+                #device.name = "alsa_card.ICUSBAUDIO7D"
+                #api.acp.auto-profile = false
+                #api.acp.auto-port = false
+                #device.param.Profile    = {
+                #    #idx = 0
+                #    name = off
+                #}
+            }
+        }
+    }
+]

pipewire/pipewire.conf

@@ -0,0 +1,345 @@
+# Daemon config file for PipeWire version "1.2.3" #
+#
+# Copy and edit this file in /etc/pipewire for system-wide changes
+# or in ~/.config/pipewire for local changes.
+#
+# It is also possible to place a file with an updated section in
+# /etc/pipewire/pipewire.conf.d/ for system-wide changes or in
+# ~/.config/pipewire/pipewire.conf.d/ for local changes.
+#
+
+context.properties = {
+    ## Configure properties in the system.
+    #library.name.system                   = support/libspa-support
+    #context.data-loop.library.name.system = support/libspa-support
+    #support.dbus                          = true
+    #link.max-buffers                      = 64
+    link.max-buffers                       = 16                       # version < 3 clients can't handle more
+    mem.warn-mlock                         = true                     # Gentoo should have good RLIMITs now
+    #mem.allow-mlock                       = true
+    #mem.mlock-all                         = false
+    #clock.power-of-two-quantum            = true
+    #log.level                             = 2
+    #cpu.zero.denormals                    = false
+
+    #loop.rt-prio = -1            # -1 = use module-rt prio, 0 disable rt
+    #loop.class = data.rt
+    #thread.affinity = [ 0 1 ]    # optional array of CPUs
+    #context.num-data-loops = 1   # -1 = num-cpus, 0 = no data loops
+    #
+    #context.data-loops = [
+    #    {   loop.rt-prio = -1
+    #        loop.class = [ data.rt audio.rt ]
+    #        #library.name.system = support/libspa-support
+    #        thread.name = data-loop.0
+    #        #thread.affinity = [ 0 1 ]    # optional array of CPUs
+    #    }
+    #]
+
+    core.daemon = true              # listening for socket connections
+    core.name   = pipewire-0        # core name and socket name
+
+    ## Properties for the DSP configuration.
+    default.clock.rate          = 44100
+    default.clock.rates = [ 44100 96000 192000 384000]
+    default.clock.allowed-rates = [ 44100 96000 192000 384000]
+    #default.clock.quantum       = 1024
+    #default.clock.min-quantum   = 32
+    #default.clock.max-quantum   = 2048
+    #default.clock.quantum-limit = 8192
+    #default.clock.quantum-floor = 4
+    #default.video.width         = 640
+    #default.video.height        = 480
+    #default.video.rate.num      = 25
+    #default.video.rate.denom    = 1
+    #
+    #settings.check-quantum      = false
+    #settings.check-rate         = false
+
+    # keys checked below to disable module loading
+    module.x11.bell = true
+    # enables autoloading of access module, when disabled an alternative
+    # access module needs to be loaded.
+    module.access = true
+    # enables autoloading of module-jackdbus-detect
+    module.jackdbus-detect = true
+}
+
+context.properties.rules = [
+    {   matches = [ { cpu.vm.name = !null } ]
+        actions = {
+            update-props = {
+                # These overrides are only applied when running in a vm.
+                default.clock.min-quantum = 1024
+	    }
+        }
+    }
+]
+
+context.spa-libs = {
+    #<factory-name regex> = <library-name>
+    #
+    # Used to find spa factory names. It maps an spa factory name
+    # regular expression to a library name that should contain
+    # that factory.
+    #
+    audio.convert.* = audioconvert/libspa-audioconvert
+    avb.*           = avb/libspa-avb
+    api.alsa.*      = alsa/libspa-alsa
+    api.v4l2.*      = v4l2/libspa-v4l2
+    api.libcamera.* = libcamera/libspa-libcamera
+    api.bluez5.*    = bluez5/libspa-bluez5
+    api.vulkan.*    = vulkan/libspa-vulkan
+    api.jack.*      = jack/libspa-jack
+    support.*       = support/libspa-support
+    video.convert.* = videoconvert/libspa-videoconvert
+    #videotestsrc   = videotestsrc/libspa-videotestsrc
+    #audiotestsrc   = audiotestsrc/libspa-audiotestsrc
+}
+
+context.modules = [
+    #{ name = <module-name>
+    #    ( args  = { <key> = <value> ... } )
+    #    ( flags = [ ( ifexists ) ( nofail ) ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Loads a module with the given parameters.
+    # If ifexists is given, the module is ignored when it is not found.
+    # If nofail is given, module initialization failures are ignored.
+    # If condition is given, the module is loaded only when the context
+    # properties all match the match rules.
+    #
+
+    # Uses realtime scheduling to boost the audio thread priorities. This uses
+    # RTKit if the user doesn't have permission to use regular realtime
+    # scheduling. You can also clamp utilisation values to improve scheduling
+    # on embedded and heterogeneous systems, e.g. Arm big.LITTLE devices.
+    { name = libpipewire-module-rt
+        args = {
+            nice.level    = -11
+            rt.prio       = 88
+            #rt.time.soft = -1
+            #rt.time.hard = -1
+            #uclamp.min = 0
+            #uclamp.max = 1024
+        }
+        flags = [ ifexists nofail ]
+    }
+
+    # The native communication protocol.
+    { name = libpipewire-module-protocol-native
+        args = {
+            # List of server Unix sockets, and optionally permissions
+            #sockets = [ { name = "pipewire-0" }, { name = "pipewire-0-manager" } ]
+        }
+    }
+
+    # The profile module. Allows application to access profiler
+    # and performance data. It provides an interface that is used
+    # by pw-top and pw-profiler.
+    { name = libpipewire-module-profiler }
+
+    # Allows applications to create metadata objects. It creates
+    # a factory for Metadata objects.
+    { name = libpipewire-module-metadata }
+
+    # Creates a factory for making devices that run in the
+    # context of the PipeWire server.
+    { name = libpipewire-module-spa-device-factory }
+
+    # Creates a factory for making nodes that run in the
+    # context of the PipeWire server.
+    { name = libpipewire-module-spa-node-factory }
+
+    # Allows creating nodes that run in the context of the
+    # client. Is used by all clients that want to provide
+    # data to PipeWire.
+    { name = libpipewire-module-client-node }
+
+    # Allows creating devices that run in the context of the
+    # client. Is used by the session manager.
+    { name = libpipewire-module-client-device }
+
+    # The portal module monitors the PID of the portal process
+    # and tags connections with the same PID as portal
+    # connections.
+    { name = libpipewire-module-portal
+        flags = [ ifexists nofail ]
+    }
+
+    # The access module can perform access checks and block
+    # new clients.
+    { name = libpipewire-module-access
+        args = {
+            # Socket-specific access permissions
+            #access.socket = { pipewire-0 = "default", pipewire-0-manager = "unrestricted" }
+
+            # Deprecated legacy mode (not socket-based),
+            # for now enabled by default if access.socket is not specified
+            #access.legacy = true
+        }
+        condition = [ { module.access = true } ]
+    }
+
+    # Makes a factory for wrapping nodes in an adapter with a
+    # converter and resampler.
+    { name = libpipewire-module-adapter }
+
+    # Makes a factory for creating links between ports.
+    { name = libpipewire-module-link-factory }
+
+    # Provides factories to make session manager objects.
+    { name = libpipewire-module-session-manager }
+
+    # Use libcanberra to play X11 Bell
+    { name = libpipewire-module-x11-bell
+        args = {
+            #sink.name = "@DEFAULT_SINK@"
+            #sample.name = "bell-window-system"
+            #x11.display = null
+            #x11.xauthority = null
+        }
+        flags = [ ifexists nofail ]
+        condition = [ { module.x11.bell = true } ]
+    }
+    { name = libpipewire-module-jackdbus-detect
+        args = {
+            #jack.library     = libjack.so.0
+            #jack.server      = null
+            #jack.client-name = PipeWire
+            #jack.connect     = true
+            #tunnel.mode      = duplex  # source|sink|duplex
+            source.props = {
+                #audio.channels = 2
+		#midi.ports = 1
+                #audio.position = [ FL FR ]
+                # extra sink properties
+            }
+            sink.props = {
+                #audio.channels = 2
+		#midi.ports = 1
+                #audio.position = [ FL FR ]
+                # extra sink properties
+            }
+        }
+        flags = [ ifexists nofail ]
+        condition = [ { module.jackdbus-detect = true } ]
+    }
+]
+
+context.objects = [
+    #{ factory = <factory-name>
+    #    ( args  = { <key> = <value> ... } )
+    #    ( flags = [ ( nofail ) ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Creates an object from a PipeWire factory with the given parameters.
+    # If nofail is given, errors are ignored (and no object is created).
+    # If condition is given, the object is created only when the context properties
+    # all match the match rules.
+    #
+    #{ factory = spa-node-factory   args = { factory.name = videotestsrc node.name = videotestsrc node.description = videotestsrc "Spa:Pod:Object:Param:Props:patternType" = 1 } }
+    #{ factory = spa-device-factory args = { factory.name = api.jack.device foo=bar } flags = [ nofail ] }
+    #{ factory = spa-device-factory args = { factory.name = api.alsa.enum.udev } }
+    #{ factory = spa-node-factory   args = { factory.name = api.alsa.seq.bridge node.name = Internal-MIDI-Bridge } }
+    #{ factory = adapter            args = { factory.name = audiotestsrc node.name = my-test node.description = audiotestsrc } }
+    #{ factory = spa-node-factory   args = { factory.name = api.vulkan.compute.source node.name = my-compute-source } }
+
+    # A default dummy driver. This handles nodes marked with the "node.always-process"
+    # property when no other driver is currently active. JACK clients need this.
+    { factory = spa-node-factory
+        args = {
+            factory.name    = support.node.driver
+            node.name       = Dummy-Driver
+            node.group      = pipewire.dummy
+            node.sync-group  = sync.dummy
+            priority.driver = 200000
+            #clock.id       = monotonic # realtime | tai | monotonic-raw | boottime
+            #clock.name     = "clock.system.monotonic"
+        }
+    }
+    { factory = spa-node-factory
+        args = {
+            factory.name    = support.node.driver
+            node.name       = Freewheel-Driver
+            priority.driver = 190000
+            node.group      = pipewire.freewheel
+            node.sync-group  = sync.dummy
+            node.freewheel  = true
+            #freewheel.wait = 10
+        }
+    }
+
+    # This creates a new Source node. It will have input ports
+    # that you can link, to provide audio for this source.
+    #{ factory = adapter
+    #    args = {
+    #        factory.name     = support.null-audio-sink
+    #        node.name        = "my-mic"
+    #        node.description = "Microphone"
+    #        media.class      = "Audio/Source/Virtual"
+    #        audio.position   = "FL,FR"
+    #        monitor.passthrough = true
+    #    }
+    #}
+
+    # This creates a single PCM source device for the given
+    # alsa device path hw:0. You can change source to sink
+    # to make a sink in the same way.
+    #{ factory = adapter
+    #    args = {
+    #        factory.name           = api.alsa.pcm.source
+    #        node.name              = "alsa-source"
+    #        node.description       = "PCM Source"
+    #        media.class            = "Audio/Source"
+    #        api.alsa.path          = "hw:0"
+    #        api.alsa.period-size   = 1024
+    #        api.alsa.headroom      = 0
+    #        api.alsa.disable-mmap  = false
+    #        api.alsa.disable-batch = false
+    #        audio.format           = "S16LE"
+    #        audio.rate             = 48000
+    #        audio.channels         = 2
+    #        audio.position         = "FL,FR"
+    #    }
+    #}
+
+    # Use the metadata factory to create metadata and some default values.
+    #{ factory = metadata
+    #    args = {
+    #        metadata.name = my-metadata
+    #        metadata.values = [
+    #            { key = default.audio.sink   value = { name = somesink } }
+    #            { key = default.audio.source value = { name = somesource } }
+    #        ]
+    #    }
+    #}
+]
+
+context.exec = [
+    #{   path = <program-name>
+    #    ( args = "<arguments>" | [ <arg1> <arg2> ... ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Execute the given program with arguments.
+    # If condition is given, the program is executed only when the context
+    # properties all match the match rules.
+    #
+    # You can optionally start the session manager here,
+    # but it is better to start it as a systemd service.
+    # Run the session manager with -h for options.
+    #
+    #{ path = "/usr/bin/pipewire-media-session" args = ""
+    #  condition = [ { exec.session-manager = null } { exec.session-manager = true } ] }
+    #
+    # You can optionally start the pulseaudio-server here as well
+    # but it is better to start it as a systemd service.
+    # It can be interesting to start another daemon here that listens
+    # on another address with the -a option (eg. -a tcp:4713).
+    #
+    #{ path = "/usr/bin/pipewire" args = [ "-c" "pipewire-pulse.conf" ]
+    #  condition = [ { exec.pipewire-pulse = null } { exec.pipewire-pulse = true } ] }
+]

polybar/config.ini

@@ -17,62 +17,57 @@
 ;==========================================================
 
 [colors]
-background = #BB111111
+background-alt = #00000000
-background-alt = #BB111111
+foreground = A3D1C6
-foreground = #D0D0D0
+primary = #B3D8A8
-primary = #5294E2
+altprime = #B3D8A8
-altprime = #6AAFE6
+secondary = #FBFFE4
-secondary = #1A1A1A
+altsecondary = #BEABA7EF
-altsecondary = #5294E2EF
+alert = #A54242
-alert = #CC3333
+disabled = FBFFE4
-disabled = #707070
 
 [bar/example]
 bottom = false
 width = 100%
 height = 20pt
-radius = 0
+radius = 8
 
 ; dpi = 96
 
-background = ${colors.background}
+background = #1B4D3E
 foreground = ${colors.foreground}
 
+tray-position = right
 line-size = 2pt
 
-border-size = 0
+border-size = 2.5pt
 border-color = #00000000
 
 padding-left = 1
 padding-right = 1
 
-;module-margin = 1
+module-margin = 1
 
 separator = |
 separator-foreground = ${colors.disabled}
 
-font-0 = JetBrainsMono Nerd Font:size=14;3
+font-0 = 0xProto Nerd Font:pixelsize=14;3
-#font-0 = 0xProto Nerd Font:pixelsize=14;3
 
 modules-left = xworkspaces xwindow 
-modules-right = polytiramisu date memory cpu battery xkeyboard tray
+modules-right = polytiramisu memory cpu date battery
 
 cursor-click = pointer
 cursor-scroll = ns-resize
 
 enable-ipc = true
 
+; tray-position = right
+
 ; wm-restack = generic
 ; wm-restack = bspwm
 ; wm-restack = i3
 
 ; override-redirect = true
-[module/xkeyboard]
-type = internal/xkeyboard
-
-; List of indicators to ignore
-blacklist-0 = num lock
-blacklist-1 = scroll lock
 
 [module/xworkspaces]
 type = internal/xworkspaces
@@ -181,11 +176,6 @@ exec = ~/.config/polybar/scripts/polytiramisu.sh
 format = <label>
 tail = true
 
-[module/tray]
-type = internal/tray
-tray-background = ${colors.background}
-tray-spacing = 4pt
-
 [settings]
 screenchange-reload = true
 pseudo-transparency = true

sway/config

@@ -21,49 +21,33 @@ set $term alacritty
 #set $menu wofi --show drun
 set $menu rofi -show drun
 
-# Font for window titles.
-
-font pango:DejaVu Sans Mono 8
 ### Output configuration
 #
-set $wallpaper_dir /media/sync/images/wallpapers
+# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
-set $screenlock '~/.config/sway/scripts/lock-now $wallpaper_dir'
+set $bg /data/sync/images/wallpapers/0002.jpg
+set $screenlock 'swaylock -i $bg'
+set $images $(xdg-user-dir PICTURES)/$(date +'%s_grim.png')
 #
 
-exec --no-startup-id ~/.config/sway/scripts/wallpaper-rotate $wallpaper_dir
+exec --no-startup-id swaybg -m fill -i $bg
 # Example configuration:
 #
 #output HDMI-A-1 resolution 1920x1080@120hz position 1920,0
 #
 # You can get the names of your outputs by running: swaymsg -t get_outputs
-# adaptive_sync on the desktop makes sway stutter/flicker; 120Hz avoids AMD
-# VRAM clock flicker at high refresh (see README).
-output DP-1 mode 1920x1080@240Hz adaptive_sync off allow_tearing yes
-#output DP-1 mode 1920x1080@240Hz adaptive_sync on allow_tearing yes
 
 ### Idle configuration
 #
-# Import the compositor socket into the systemd --user environment. Without
-# this, systemd-managed services (and dbus-activated apps like portals) can't
-# reach the compositor at all - this is why swayidle silently failed to run
-# after being restarted via systemd earlier.
-exec --no-startup-id systemctl --user import-environment WAYLAND_DISPLAY SWAYSOCK XDG_CURRENT_DESKTOP DISPLAY
-exec --no-startup-id hash dbus-update-activation-environment 2>/dev/null && dbus-update-activation-environment --systemd WAYLAND_DISPLAY SWAYSOCK XDG_CURRENT_DESKTOP DISPLAY
-# gamemoded keeps the env it started with (e.g. from an i3 session); restart it
-# so its swaymsg hooks (~/.config/gamemode.ini) can reach this sway.
-exec --no-startup-id systemctl --user import-environment SWAYSOCK && systemctl --user try-restart gamemoded
-#
 # Example configuration:
 #
 exec swayidle -w \
-         timeout 300 $screenlock \
+         timeout 900 $screenlock \
-         timeout 900 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
+         timeout 1800 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
          before-sleep $screenlock
 #
-# This will lock your screen after 300 seconds (5 min) of inactivity, then
+# This will lock your screen after 300 seconds of inactivity, then turn off
-# turn off your displays after 900 seconds (15 min), and turn your screens
+# your displays after another 300 seconds, and turn your screens back on when
-# back on when resumed. It will also lock your screen before your computer
+# resumed. It will also lock your screen before your computer goes to sleep.
-# goes to sleep.
 
 ### Input configuration
          input "type:touchpad" {
@@ -86,18 +70,14 @@ exec swayidle -w \
 input "2:7:SynPS/2_Synaptics_TouchPad" {
     events disabled_on_external_mouse
 }
-input "type:pointer" {
+input "5426:156:Razer_Razer_DeathAdder_V2_X_HyperSpeed" {
-    accel_profile "flat" # no mouse acceleration for all pointers
-}
-input "5426:156:Razer_Razer_DeathAdder_V2_X_HyperSpeed_Mouse" {
     accel_profile "flat" # disable mouse acceleration (enabled by default; to set it manually, use "adaptive" instead of "flat")
     pointer_accel 0.5 # set mouse sensitivity (between -1 and 1)
 }
 
 #exec --no-startup-id /usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh
-exec --no-startup-id source ~/.config/fcitx.sh
-exec --no-startup-id fcitx5
 exec --no-startup-id kwalletd6
+exec --no-startup-id fcitx5
 #exec --no-startup-id blueman-applet
 exec --no-startup-id owncloud 
 exec --no-startup-id waybar
@@ -117,7 +97,7 @@ bindsym XF86AudioRaiseVolume exec --no-startup-id $raise-volume
 bindsym XF86AudioLowerVolume exec --no-startup-id $lower-volume
 bindsym XF86AudioMute        exec --no-startup-id $mute-sink
 bindsym XF86AudioMicMute     exec --no-startup-id $mute-source
-bindsym $mod+slash  exec --no-startup-id $mute-sink
+bindsym $mod+slash  exec --no-startup-id wpctl $mute-sink
 bindsym $mod+period exec --no-startup-id $raise-volume
 bindsym $mod+comma  exec --no-startup-id $lower-volume
 
@@ -136,8 +116,8 @@ bindsym $mod+Shift+comma exec playerctl previous
 bindsym $mod+Shift+period exec playerctl next 
 bindsym $mod+Shift+slash exec playerctl play-pause
 
-bindsym Print exec --no-startup-id bash -c 'f="$(xdg-user-dir PICTURES)/$(date +%s_grim.png)" && grim -g "$(slurp)" "$f" && wl-copy < "$f" && notify-send "Screenshot saved" "$f"'
+bindsym Print exec grim -g "$(slurp)" - | wl-copy
-bindsym $mod+Print exec --no-startup-id bash -c 'f="$(xdg-user-dir PICTURES)/$(date +%s_grim.png)" && grim "$f" && wl-copy < "$f" && notify-send "Screenshot saved" "$f"'
+bindsym $mod+Print exec grim -o $images
 ### Key bindings
 #
 # Basics:
@@ -151,23 +131,20 @@ bindsym $mod+Shift+q kill
 # Start your launcher
 bindsym $mod+d exec $menu
 #
-bindsym $mod+l exec ~/.config/sway/scripts/lock-now $wallpaper_dir
+bindsym $mod+l exec $screenlock
-bindsym $mod+Shift+o exec ~/.config/sway/scripts/lock-now $wallpaper_dir && systemctl suspend
 # Drag floating windows by holding down $mod and left mouse button.
 # Resize them with right mouse button + $mod.
 # Despite the name, also works for non-floating windows.
 # Change normal to inverse to use left mouse button for resizing and right
 # mouse button for dragging.
-floating_modifier $mod
+floating_modifier $mod normal
 
 # Reload the configuration file
 bindsym $mod+Shift+c reload
-# restart sway in place (preserves your layout/session, can be used to upgrade sway)
-bindsym $mod+Shift+r restart
 
 # Exit sway (logs you out of your Wayland session)
 #bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
-bindsym $mod+Shift+p exec systemctl poweroff
+bindsym $mod+Shift+p exec loginctl poweroff
 bindsym $mod+Shift+l exec swaymsg exit 
 #
 # Moving around:
@@ -219,10 +196,10 @@ bindsym $mod+Shift+0 move container to workspace number 10
 # Layout stuff:
 #
 # You can "split" the current object of your focus with
-# $mod+h or $mod+v, for horizontal and vertical splits
+# $mod+b or $mod+v, for horizontal and vertical splits
 # respectively.
-bindsym $mod+h split h
+bindsym $mod+b splith
-bindsym $mod+v split v
+bindsym $mod+v splitv
 
 # Switch the current container between different layout styles
 bindsym $mod+s layout stacking
@@ -230,7 +207,7 @@ bindsym $mod+w layout tabbed
 bindsym $mod+e layout toggle split
 
 # Make the current focus fullscreen
-bindsym $mod+Shift+space fullscreen toggle
+bindsym $mod+Shift+space fullscreen
 
 # Toggle the current focus between tiling and floating mode
 bindsym $mod+f floating toggle
@@ -281,21 +258,15 @@ mode "resize" {
 }
 bindsym $mod+r mode "resize"
 
-# Status bar is provided by waybar (started above); no built-in sway bar.
+#
-
+# Status Bar:
-        # class                 border      bground     text        indicator   child_border
+#
-        client.focused          #3A7CA5     #3A7CA5     #E2EBF0     #0D1B27     #3A7CA5
+# Read `man 5 sway-bar` for more information about this section.
-        client.placeholder      #0D1B27     #0D1B27     #BDD5E4     #0D1B27     #0D1B27
+bar {
-        client.unfocused        #0D1B27     #152535     #6A8DA0     #0D1B27     #152535
+}
-        client.focused_inactive #1A3347     #1A3347     #6A8DA0     #1A3347     #1A3347
 
 for_window [class="^.*"] border pixel 1
 
-# Don't lock or blank the screen while a fullscreen window (game, video,
-# presentation) is focused - ties into the same idle protocol swayidle uses.
-for_window [app_id="^.*"] inhibit_idle fullscreen
-for_window [class="^.*"] inhibit_idle fullscreen
-
 #floating 
 for_window [app_id="signal"] floating enable
 for_window [app_id="fluffychat"] floating enable

sway/scripts/lock-now

@@ -1,8 +0,0 @@
-#!/bin/bash
-wall_dir="${1:?wallpaper directory required}"
-img=$(find "$wall_dir" -type f \( -iname "*.jpg" -o -iname "*.jpeg" -o -iname "*.png" \) | shuf -n1)
-swaymsg -q output DP-1 adaptive_sync off            # lock screen redraws rarely: fixed 240 Hz
-swaylock -f ${img:+-i "$img"}
-# once unlocked, turn VRR back on if a game (gamemode) is still running
-( while pgrep -x swaylock >/dev/null; do sleep 1; done
-  gamemoded -s | grep -q 'is active' && swaymsg -q output DP-1 adaptive_sync on ) &

sway/scripts/wallpaper-rotate

@@ -1,48 +0,0 @@
-#!/bin/bash
-wall_dir="${1:?wallpaper directory required}"
-interval="${2:-1800}"
-
-pick_wall() {
-    find "$wall_dir" -type f \( -iname "*.jpg" -o -iname "*.jpeg" -o -iname "*.png" \) | shuf -n1
-}
-
-set_wall() {
-    [ -n "$1" ] || return
-    pkill -x swaybg
-    swaybg -m fill -i "$1" &
-}
-
-has_fullscreen() {
-    python3 - <<'EOF'
-import json, subprocess, sys
-
-def is_fullscreen(node):
-    if node.get('window') and node.get('fullscreen_mode', 0) > 0: return True
-    return any(is_fullscreen(c) for c in node.get('nodes', []) + node.get('floating_nodes', []))
-
-def find_ws(node, name):
-    if node.get('type') == 'workspace' and node.get('name') == name: return node
-    for c in node.get('nodes', []) + node.get('floating_nodes', []):
-        r = find_ws(c, name)
-        if r: return r
-
-try:
-    wss = json.loads(subprocess.check_output(['swaymsg', '-t', 'get_workspaces'], stderr=subprocess.DEVNULL))
-    tree = json.loads(subprocess.check_output(['swaymsg', '-t', 'get_tree'], stderr=subprocess.DEVNULL))
-    for ws in wss:
-        if ws.get('visible'):
-            node = find_ws(tree, ws['name'])
-            if node and is_fullscreen(node):
-                sys.exit(0)
-except Exception:
-    pass
-sys.exit(1)
-EOF
-}
-
-# Initial wallpaper
-set_wall "$(pick_wall)"
-
-while sleep "$interval"; do
-    has_fullscreen || set_wall "$(pick_wall)"
-done

sway/swaylock.conf

@@ -1,4 +0,0 @@
-# Background image is picked at lock time by scripts/lock-now (-i flag)
-
-# Set the scaling mode for the image
-scaling=fill

waybar/config

@@ -4,7 +4,7 @@
                   // Choose the order of the modules
         "modules-left": ["sway/workspaces", "sway/window"],
         "modules-center": ["clock"],
-        "modules-right": ["custom/tiramisu","battery", "network", "bluetooth", "wireplumber", "tray"],
+        "modules-right": ["custom/tiramisu","battery", "bluetooth", "network", "wireplumber", "tray"],
         //"modules-right": ["custom/tiramisu", "bluetooth",network", "wireplumber", "tray"],
         // Modules configuration
         //        "hyprland/workspaces": {
@@ -23,27 +23,25 @@
         "clock": {
             // "timezone": "America/New_York",
             "tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
-            "format": "{:%Y-%m-%d %H:%M}",
             "format-alt": "{:%Y-%m-%d %H:%M}"
         },
         "bluetooth": {
             //"format": "{status}  ",
             "format-on": "",
             "format-off": "󰂲",
-            //"format-connected": "{device_alias} 󰂱",
+            "format-connected": "{device_alias} 󰂱",
-            "format-connected": "󰂱",
             // "format-device-preference": [ "device1", "device2" ], // preference list deciding the displayed device
             "tooltip-format": "{controller_alias}\t{controller_address}\n\n{num_connections} connected",
             "tooltip-format-connected": "{controller_alias}\t{controller_address}\n\n{num_connections} connected\n\n{device_enumerate}",
             "tooltip-format-enumerate-connected": "{device_alias}\t{device_address}",
             "tooltip-format-enumerate-connected-battery": "{device_alias}\t{device_address}\t{device_battery_percentage}%",
-            "on-click": "dbus-launch --exit-with-session blueman-manager"
+            "on-click": "~/.local/bin/rofi-bluetooth"
+            //"on-click": "blueman-manager"
         },
         "network": {
-            "interface": "wlp0s20f3",
+            "interface": "wls2",
             "format": "{ifname}",
-            //"format-wifi": "{essid} {icon}",
+            "format-wifi": "{essid} {icon}",
-            "format-wifi": "{icon}",
             "format-ethernet": "{ipaddr}/{cidr} 󰊗",
             "format-disconnected": "", //An empty format will hide the module.
             "tooltip-format": "{ifname} via {gwaddr} 󰊗",

waybar/style.css

@@ -83,6 +83,15 @@ tooltip label{
     background: @bg_hover;
     color: @content_main;
 }
+button {
+    border: none;
+    border-radius: 0;
+}
+button:hover {
+    box-shadow: inherit;
+    text-shadow: inherit;
+    background: inherit;
+}
 
 #taskbar {
 }

xorg/20-amdgpu.conf

@@ -1,5 +0,0 @@
-Section "Device"
-    Identifier "AMD"
-    Driver     "amdgpu"
-    Option     "VariableRefresh" "true"
-EndSection

zathura/zathurarc

@@ -1,2 +0,0 @@
-set selection-clipboard clipboard
-set guioptions "sh"